SAF 125 NBR-60 M14x1.5-AG

Číslo dílu.: 10.01.01.10748

Flat suction cup (round) for very dynamic handling of smooth and oily workpieces

SAF 125 NBR-60 M14x1.5-AG
Phase-out article
Size125
Suction cup materialNitrile rubber NBR
Material hardness [Shore A]60 Shore A
Nipple materialAluminum
ConnectionM14x1.5-AG

Článek 10.01.01.10748 vyprší a je stále k dispozici do 31.12.2025

Po tomto datu již nelze položku objednat. Chcete-li najít vhodnou alternativu, obraťte se na svého místního zástupce na adrese +420 581 621 021 nebo schmalz@schmalz.cz

Kontaktní formulář
SAF 125 NBR-60 M14x1.5-AG
Atribut Wert
dn 6 mm
Dmax(S) 135 mm
Ds 125 mm
G1 M14x1.5-M
H 43 mm
LG1 12 mm
SW1 22 mm
Z (Stroke) 12,50 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
Atribut Wert
Suction force (-600mbar) 660 N
Lateral force 475 N
Lateral force (oily surface) 400 N
Volume 119 cm³
Curve radius (min) (convex) 165 mm
Hose diameter (rec.) d 9 mm
Size 125
Suction cup material Nitrile rubber NBR
Material hardness [Shore A] 60 Shore A
Weight 156,10 g
Number of folds 0
Product family SAF


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m

Informace o objednávce: SAF 125 NBR-60 M14x1.5-AG

Suction cup SAF, available in various diameters, is delivered with connection nipple vulcanized to elastomer part.