SAF 80 NBR-60 M14x1.5-AG

Part no.: 10.01.01.10742

Flat suction cup (round) for very dynamic handling of smooth and oily workpieces

Phase-out article
Size80
Suction cup materialNitrile rubber NBR
Material hardness [Shore A]60 Shore A
Nipple materialAluminum
ConnectionM14x1.5-AG

The item 10.01.01.10742 phases out and is still available until 12-31-2025

Beginning on this date, the item can no longer be ordered. Your local contact person would be pleased to help you find an alternative. You can reach him/her at +43 7229 24 24 4 or schmalz@schmalz.at

SAF 80 NBR-60 M14x1.5-AG
Attribute Value
dn 6 mm
Dmax(S) 89 mm
Ds 83 mm
G1 M14x1.5-M
H 35 mm
LG1 12 mm
SW1 22 mm
Z (Stroke) 7.60 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
Attribute Value
Suction force (-600mbar) 272 N
Lateral force 205 N
Lateral force (oily surface) 180 N
Volume 36.70 cm³
Curve radius (min) (convex) 100 mm
Hose diameter (rec.) d 6 mm
Size 80
Suction cup material Nitrile rubber NBR
Material hardness [Shore A] 60 Shore A
Weight 66.10 g
Number of folds 0
Product family SAF


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m

Ordering information: SAF 80 NBR-60 M14x1.5-AG

Suction cup SAF, available in various diameters, is delivered with connection nipple vulcanized to elastomer part.