SPU 160 NBR-55 G1/2-IG

Part no.: 10.01.01.01116

Suction plate (round), universal, for smooth and slightly rough surfaces

SPU 160 NBR-55 G1/2-IG
Size160
Suction cup materialNitrile rubber NBR
Material hardness [Shore A]55 Shore A
ConnectionG1/2"-F
Suction Plate SUF - The intelligent facelift with optimised performance!

Weight reduction compared to SPU due to carrier plate made of reinforced plastic.
Sealing ring made of oil and ozone-resistant NBR with optimised friction structure for increased suction and lateral force.
Innovative connection between supporting plate and sealing ring simplifies replacement and protects against twisting.
Read out product information via NFC interface with the smartphone and carry out replacement procurement.
SPU 160 NBR-55 G1/2-IG
Attribute Value
d 34 mm
d2 113 mm
d3 88 mm
Dmax(S) 170 mm
Ds 160 mm
G1 G1/2"-F
G2 G1/4"-F
H 24.50 mm
H1 26 mm
L2 36.50 mm
LG1 13.50 mm
LG2 15 mm
Z (Stroke) 8 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
Attribute Value
Suction force 1090 N
Suction force d2 600 N
Volume 142 cm³
Curve radius (min) (convex) 350 mm
Hose diameter (rec.) d 12 mm
Size 160
Suction cup material Nitrile rubber NBR
Material hardness [Shore A] 55 Shore A
Weight 400 g
Number of folds 0
Product family SPU


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m

Product recommendations

Basic Ejectors SBPL
Basic Ejectors SBPL
  • Suction rate: 290 to 1,140 l/min
  • Max. vacuum: 61 or 90 %
  • Main body made of plastics
×
Basic Ejectors SBPL
Basic ejector with extremely high suction capacity for handling airtight or porous workpieces, in systems with central vacuum generation.
Spring Plungers FSTE
Spring Plungers FSTE
  • Connection: M3, M5, G1/8” to G1/2”
  • Stroke: 5 to 90 mm
  • Integrated vacuum feed
×
Spring Plungers FSTE
Spring plunger with damping spring for height compensation and careful handling of fragile workpieces.
Flexolink FLK
Flexolink FLK
  • Connection: M10x1.25 to G1/2”
  • Deflection: max. 12°
  • Rubber buffer (vulcanised into position) as a joint
×
Flexolink FLK
Polydirectional joint mounting made from high-quality steel with vulcanize-bonded rubber buffer to adjust the suction cup to uneven surfaces.

Ordering information: SPU 160 NBR-55 G1/2-IG

Suction plate SPU (sealing ring + support plate) is delivered assembled. The assembly consists of:

  • Sealing ring of type DR-SPU – elastomer part, available in various diameters
  • Aluminum support plate, available with various threads
  • Optional product addition: touch valve, steep sealing lip, peeling insert


Available spare parts: sealing ring DR-SPU, touch valve TV