Schmalz Companies
Select your Schmalz subsidiary in one of the following countries:
Country
The holder HT-SG can be configured to suit your application thanks to its modular design. Choose between a variety of connections, suction cups and connectors.
You can find information about the individual components and selection options on the various tab pages.
| Code | Version |
|---|---|
| HT-UNIT-SG | Holder for suction cups |
| Code | Connection Tooling |
|---|---|
| A2 | Cylindrical (ø 19 mm, apple-core) |
| A3 | Spherical (ø 28.5 mm) |
| A5 | Spherical (ø 32 mm) |
| Code | Connection suction cups |
|---|---|
| G05...G08 | G1/4-IG to G3/8-AG |
| M21...M39 | M10-IG to M16-IG |
| N07...N11 | NPT1/4-AG and NPT3/8-AG |
| RA | Rectangular adapter |
| Code | Type | Version |
|---|---|---|
| E0 | – | Without vacuum generator |
If you want to integrate a vacuum generator into your holder system HT, please select one of the two following product families:
Holder for suction cups HT-SG...E
Holder for suction cups HT-SG...I
The holder system HT can be used in combination with a variety of different suction cups. You can choose between various shapes, sizes, materials and connectors. The selection options for the suction cups are illustrated below using three examples. You can find a full overview of all the available product families on the overview page for holder systems for tooling.
| Example | Type | Suction area [mm] | Material |
|---|---|---|---|
| SAX-80-ED-85 | SAX (bell-shaped) | 80 | ED-85 (Elastodur) |
| SAB-50-NBR-60 | SAB (1.5 folds, round) | 50 | NBR-60 (Nitrile rubber) |
| PFYN-60-VU1 | PFYN (flat, round) | 60 | VU1 (Vulkollan) |
| Code | Type | Version |
|---|---|---|
| VS0 | – | Without vacuum and pressure switches |
| Code | Type | Version |
|---|---|---|
| PF0 | – | Without screw in push fitting |
| PF1...PF8 | STV-GE G1/8-AG 4 to STV-GE G1/4-AG 12 | Screw in push fitting, straight |
| PF9...PF17 | STV-W G1/8-AG 4 to STV-W G1/4-AG 12 MV | Screw in push fitting, angled |
| Field | Code | Explanation |
|---|---|---|
| (1) | HT-UNIT-SG | Holder for suction cups HT-SG |
| (2) | A2-G08 | Cylindrical (apple-core) connector with a diameter of 19 mm and a G3/8 male thread |
| (3) | E0 | Without vacuum generator |
| (4) | SAX-80-ED-85 | Bell-shaped suction cup SAX made from Elastodur with a suction area of 80 mm and a 3/8 female thread (10.01.19.00141) |
| (5) | VS0 | Without vacuum and pressure switch |
| (6) | PF0 | Without screw in push fitting |
Schmalz also offers the right vacuum/pressure hoses to complete your holder system.
Note:
Our experienced specialists can assist you with the configuration of your holder HT-SG. Find the right contact person: Local contact
Contact us
T: +61 3 9215 8800
F:
schmalz@schmalz.com.au
