SGF 200 EPDM-55 G1/2-IG

Part no.: 10.01.01.12476

Flat suction cup (round) for highly dynamic handling of glass

Size200
Suction cup materialEPDM
Material hardness [Shore A]55 Shore A
ConnectionG1/2-IG
ConnectionG1/2"-F
SGF 200 EPDM-55 G1/2-IG
Attribute Value
d2 185 mm
d3 134 mm
Dmax(S) 213 mm
Ds 206 mm
G1
G2 G1/4"-F
H 22 mm
L2 52.80 mm
LG1 14 mm
LG2 14 mm
Z (Stroke) 3.60 mm
Dmk 58.30 mm
G4 M6-F
LG4 10.50 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
Attribute Value
Suction force (-600mbar) 1880 N
Suction force d2 1610 N
Volume 144.07 cm³
Curve radius (min) (convex) 3500 mm
Hose diameter (empf.) d 12 mm
Size 200
Number of folds 0
Suction cup material EPDM
Material hardness [Shore A] 55 Shore A
Weight 1040 g
Product family SGF


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Pull-off force: The pull-off force of the versions made of natural rubber is reduced by about 40% Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m
The matching documentation for this product is available in this section.

Documents

Language

Ordering information: SGF 200 EPDM-55 G1/2-IG

Suction plate SGF (sealing ring + support plate) is delivered assembled. The assembly consists of:

  • Sealing ring of type DR-SGF – elastomer part, available in various diameters
  • Aluminum support plate – available with various threads

 

Available spare parts: sealing ring of type DR-SGF

Available accessories: touch valve, filter screen (sieve, round)