| Size | 360 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
Spare Parts VacuMaster Basic / Comfort
Design
Design
- Vacuum generators, filters, valves, drives, measuring equipment, suction plates and connections
Technical Data
Technical Data
- Wide range of spare and wear parts
- Vacuum generators, filters, valves, drives, measuring equipment, suction plates and connections
1 - 10 from 18 results
| Size | 250 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Utilization design | Pump EVE-TR |
| Size | 16 |
| contains | Brush slide |
| and | Filter |
| Filter pore size | 50 (µm) |
| Outside diameter D | 27.5 (mm) |
| Length L | 50.5 (mm) |
| Filter material | Paper |
| Utilization design | Filter VF |
| Size | 3/8 |
| Thread G1 | G3/4"-M |
| Outside diameter D | 50 (mm) |
| Length L | 120 (mm) |
| Utilization design | Multi-stage ejectors |
RSV 14 G3/8-IG MS
Part no.: 10.05.05.00002
No-return valve for maintaining the system vacuum in the case of a power failure
| Nominal size | 14 (mm) |
| Thread G1 | G3/8"-F |
| Nominal flow rate | 20 (m³/h) |
| Operating temperature | -20 ... 100 °C |
| Material | Brass |
| Connection | Hose 8/6 with Cap nut |
| Filter pore size | 50 (µm) |
SPK 160 MOS EPDM-15 G1/2-IG
Part no.: 12.02.11.00479
Suction plate (round) for rough and structured surfaces
