Vacuum Lifting Device VacuMaster Comfort
Lift capacity up to 750 kg
Select your Schmalz subsidiary in one of the following countries:
Lift capacity up to 750 kg
We would be happy to help you design a vacuum lifting device and a compatible crane.
The VacuMaster Comfort bases on the modular system of the VacuMaster Basic and offers an operator handle that brings together all of the device’s controls as well as a controlled vacuum generator for reducing energy consumption.
A Schmalz chain hoist is required to operate a VacuMaster Comfort.
The basic module is the heart of every VacuMaster. It contains the vacuum generator, an audible warning device as well as all the measuring and control devices. Depending on the application, you can choose from three different basic modules whose shape and design are optimally suited to the handling task.
(1) Vacuum gauge (manometer)
(2) Integrated air-saving function
(3) Emergency-stop function
(4) Swivel function - continuous swiveling up to max. 90° or 180°
(5) Vacuum off - secure release of the load requiring two hands
(6) Chain hoist up/ down - lifts and lowers the load
(7) Vacuum on - picks up the load
(8) Operator handle with integrated function modules for Schmalz chain hoist
Light, robust and flexible
The combination of aluminum and high-strength plastic allows the cross beams and suction plates to be easily adjusted to quickly adapt to changing formats.
Integrated vacuum reservoir
The large vacuum reservoir prevents the load from falling in the case of a power failure and makes gripping faster during repeated lifting processes.
Versatility for every task
Allows for optimal adaptation to the workpiece and to requirements such as heat resistance, food safety and mark-free gripping. Select from suspension which is rigid, spring-mounted or both flexible and spring-mounted.
Electric vacuum generator for smooth and suction-tight workpieces weighing up to 750 kg.
Basic ejector with highest suction rate and low compressed air consumption.
Thanks to their modular system, the VacuMaster Basic and VacuMaster Comfort can be custom configured for any application. The technical data of the devices are dependent on the selected configuration. You can use the following data on pre-configured lifting devices for standard workpiece formats as a guide for determining the recommended values for your VacuMaster.
The vacuum lifter from the product range of Schmalz are complemented by the crane systems.
The lightweight aluminum cranes and jib cranes have been adapted to the loads of the vacuum lifter. The modular design allows for easy integration of the vacuum lifter including crane system into your work environment.
Schmalz offers compatible chain hoists for its vacuum lifting devices. The chain hoists are also adapted to the load-bearing capacities of the lifting devices.
Maximize stack heights
Large height differences are no problem with the swiveling operator handle. The working posture remains ergonomic in any position.
Adapts to changing workpieces
With the vacuum gripper shut-off valve several vacuum grippers can be turned off for handling of cut pieces or pieces with gaps.
Secure storage of the lifting device
When the lifting device is not in use, the parking stands allow it to be stored securely while protecting the suction plates. This allows the crane to be used for other purposes.
The suction plate covers prevent the plates from leaving marks on sensitive workpieces such as glass sheets or solar panels.
Protection against water
The water separator prevents water from entering the vacuum generator during moist processes such as waterjet cutting.
Are you in search of other lifting devices? More lifting devices you can find here.