Vacuum area gripping system for external vacuum generator, with flow resistors

Length L1,432 mm
Width B130 mm
Arrangement3R54
Add. functionFilter
construction shape fittingsStraight
External diameter D60 mm
Add. function1x Contr.-val. vacuum/blow off
Weight8.5 kg
Max. air consumption blow off800 l/min
Product familyFMP
FMP-S-SW140 1432 3R54 SPB2-40P F G60
Attribute Value
B 130 mm
B3 21.60 mm
D 60 mm
H 104.80 mm
H1 150.40 mm
H2 55 mm
H3 7.70 mm
H4 5.50 mm
H5 46 mm
L 1432 mm
L2 1392 mm
L3 77 mm
Y1 90 mm
Valve type SW


Note: Vacuum hose with internal diameter equal to dimension D required. See Technical Data -> Shape
Attribute Value
Arrangement 3R54
Number of suction cells 77
Suction force at -250 mbar 680 N
Add. function Filter
Add. function Filter
Add. function 1x Contr.-val. vacuum/blow off
Weight 8.50 kg
Sealing element Suction Cups
Evacuation rate for pu = -0,25 bar 1050 l/min
Product family FMP


For compressed air with 5.5 bar input pressure At -0.25 bar and with the gripper fully covered by a workpiece typical for the application (wooden board with structured surface) The external vacuum generator used must supply at least the specified suction flow (at the vacuum connection piece of the FMP) at -0.25 bar but max. 135 % of the specified suction flow
The matching documentation for this product is available in this section.

Documents

Choose language