FMP-SVK 442 5R18 O10O10 G32 > Area Gripping Systems and End Effectors

Vacuum area gripping system for external vacuum generator, with ball check valves

Length L	442 mm
Width B	130 mm
Arrangement	5R18
Material type	Foam O, Height 2x10 mm
construction shape fittings	Straight
External diameter D	32 mm
Weight	2.1 kg
Product family	FMP

Attribute	Value
B	130 mm
B3	21.60 mm
D	32 mm
H	65 mm
H1	106 mm
H2	20 mm
H3	7.70 mm
H4	5.50 mm
H5	41 mm
L	442 mm
L2	402 mm
Y1	90 mm
Valve type	SVK

Note: Vacuum hose with internal diameter equal to dimension D required. See Technical Data -> Shape

Attribute	Value
Arrangement	5R18
Material type	Foam O, Height 2x10 mm
Number of suction cells	110
Suction force at -250 mbar	430 N
Weight	2.10 kg
Sealing element	Sealing Foam
Evacuation rate for pu = -0,25 bar	300 l/min
Product family	FMP

For compressed air with 5.5 bar input pressure At -0.25 bar and with the gripper fully covered by a workpiece typical for the application (wooden board with structured surface) The external vacuum generator used must supply at least the specified suction flow (at the vacuum connection piece of the FMP) at -0.25 bar but max. 135 % of the specified suction flow