Spherically mounted spring plunger with two damping springs, centering spring and special universal ball joint for handling workpieces with height differences
Handling very sensitive components without additional control requirements (e.g. glass sheets), it ensures the workpieces are set down gently
Handling very warped and naturally grown materials (e.g. dried wood) without additional technical control requirements
Use under harsh conditions
For handling tasks with very dynamic motion and short cycle times
Maintenance-free and durable thanks to high-quality plain bearings and machined push rod; enables minimum cycle times
With two damping springs optimized for sensitive workpieces
Plunger with centering spring and spherical calotte optimized for extremely uneven workpiece positions
Spring plunger with stainless steel plunger rod, brass guide sleeve with integrated sliding sleeve both lower (5) and upper (1) damping spring
Powder coated plate (2) as attachment to an aluminum section and to hold the automatic centering unit consisting of the centering spring (3) and the spring seat nut (4); the centering spring pretensioning (3) can be set using locking screws in the spring seat nut (4).
Jointed mounting (6) available as an option
Powder coated connection plate (7) for connection to an area gripper; the connection plate can be adapted to individual area gripping systems
Stroke: 25 to 75 mm
Jamming safe by spherical mounting
The matching documentation for this product is available in this section.