Vacuum Tube Lifters JumboSprint

For compact workpieces weighing up to 300 kg

MAX. 300 KG
MAX. 3 X 1 M

The JumboSprint is equipped with a bow-shaped operator handle which extends all the way around the unit. This allows the user to optimally position it on compact goods such as bags or rubber bales. The load is raised by pulling up on the handle lever and lowered by pushing down.


Fast and frequent lifting and moving of compact workpieces up to 300 kg
Handling of workpieces such as bags, barrels, buckets, jugs and rubber bales in internal logistics processes
Ensures the flow of materials when loading or unloading of mixing machines
Available in a stainless steel version for special ambient conditions, e.g. in food related areas
All around operator handle for optimal transfer of force and guidance of the device
Modular design and extensive gripper and accessories program for implementing individual requirements
Increases employee motivation and minimizes work-related musculoskeletal disorders
Optional rotation unit for continuously rotating and precisely positioning workpieces up to 200 kg
Handling by only one person
Awarded the seal of approval by Aktion Gesunder Rücken e. V.
Schmalz vacuum lifters and crane systems support the back and musculoskeletal system when lifting light and heavy loads. They reduce strain and help to make the work environment ergonomic. This is confirmed by the independent association Aktion Gesunder Rücken e. V. (AGR) with its seal of approval.

(1) Radio remote control SRC for vacuum generator (optional)

(2) Filter - changable without tools

(3) Bow-shaped Operator handle for Lifting, lowering and releasing the load

(4) Suspension height can be adjusted without the load attached

(5) Quick-change adapter for vacuum grippers (optional)

(6) Suspension height can be adjusted with a load attached

Quick-change adapter
Quick-change adapter

Versatility is key: Schmalz offers the right suction cups for virtually any application. With quick-change adapter the gripper can be changed quickly and easily.

Single vacuum gripper
Single vacuum gripper

For compact goods such as cardboard boxes, barrels, buckets, jugs and cabinets.

Single vacuum gripper, long
Single vacuum gripper, long

For pallets, narrow cardboard boxes, beams, square tubes and other elongated workpieces.

Round vacuum gripper
Round vacuum gripper

For barrels, buckets or stone slabs with rough surfaces.

Sack gripper
Sack gripper

For paper and plastic bags, raw rubber bails and shrink-wrapped packages.

Double vacuum gripper
Double vacuum gripper

For cardboard boxes, crates or sheets. The vacuum grippers can be continuously adjusted along the beam.

Double vacuum gripper FMP
Double vacuum gripper FMP

For pallets, sections or cut pieces where the vacuum gripper is not fully covered by the workpiece. The grippers can be continuously adjusted along the beam.

Quadruple vacuum gripper
Quadruple vacuum gripper

For large cardboard boxes, sheets and non-rigid pieces. The vacuum grippers can be continuously adjusted lengthwise and crossways.

Multiple vacuum gripper
Multiple vacuum gripper

For uneven workpieces such as foil trays or unstable cardboard boxes. The individual vacuum grippers optimally compensate for any unevenness.

The vacuum tube lifters JumboErgo and JumboSprint can be configured specifically based on the requirements of each individual application due to their modular design. The technical data varies depending on the configuration and on the vacuum gripper chosen.

The following technical data are standard values.

Type Workpiece format*
Min [mm]
Workpiece format*
Max [mm]
Operator handle
length L [mm]
Max. lifting
speed [m/min]
Max. lifting stroke
Z [mm]
H** [mm]
JumboErgo 300x200 4,000x2,000 350-1,000 60 1,700 2,850
  300x200 4,000x2,000 350-1,000 60 2,100 3,400
JumboSprint 300x200 3,000x1,000 155-500 60 1,700 2,850
  300x200 3,000x1,000 155-500 60 2,100 3,400

A lift capacity of 140 kg and higher applies: lifting stroke Z +160 mm, height H +250 mm
*Depends on the vacuum gripper chosen
**Vacuum gripper not included (total height = H + height of the vacuum gripper)

Lift Capacities

Jumbo type Max. lift capacity [kg] Ø Lift tube
  Horizontal 90° swivel D [mm]
Ergo/Sprint 35 35 - 120
Ergo/Sprint 45 45 30 140
Ergo/Sprint 65 65 50 160
Ergo/Sprint 85 85 70 178
Ergo/Sprint 110 110 90 203
Ergo/Sprint 140 140 120 230
Ergo/Sprint 200 200 - 250
Ergo/Sprint 300 300 - 305

Spare parts


Product recommendations

Handling Systems in Action
See our handling systems in real processes.