FMP-i-SVK 442 3R18 O20 V0 G32

Part no.:

Intelligent area gripping system for external vacuum generator, with ball check valves

Length L442 mm
Length L1446 mm
Width B130 mm
Material typeFoam O, Height 20 mm
construction shape fittingsStraight
External diameter D32 mm
Add. function1x control valve vacuum/blow-off
Max. air consumption blow off800 l/min
Construction shape vacuum switchNormally open
Weight2.8 kg
Product familyFMP
FMP-i-SVK 442 3R18 O20 V0 G32
Attribute Value
B 130 mm
B3 21.60 mm
D 32 mm
H 70 mm
H1 111 mm
H2 20 mm
H3 7.70 mm
H4 5.50 mm
H5 41 mm
L 442 mm
L1 446 mm
L2 402 mm
L3 80.90 mm
Y1 90 mm
Valve type SVK

Note: Vacuum hose with internal diameter equal to dimension D required. See Technical Data -> Shape
Attribute Value
Arrangement 3R18
Material type Foam O, Height 20 mm
Number of suction cells 66
Suction force at -250 mbar 550 N
Electrical connection Male connect M8, 6 pole
Add. function No vacuum display
Add. function 1x control valve vacuum/blow-off
Weight 2.80 kg
Sealing element Sealing Foam
Evacuation rate for pu = -0,25 bar 300 l/min
Product family FMP

For compressed air with 5.5 bar input pressure At -0.25 bar and with the gripper fully covered by a workpiece typical for the application (wooden board with structured surface) The external vacuum generator used must supply at least the specified suction flow (at the vacuum connection piece of the FMP) at -0.25 bar but max. 135 % of the specified suction flow
The matching documentation for this product is available in this section.



Tiếng Việt
The documentation is also fully available in English.



The matching software for this product is available in this section.



Ordering information: FMP-i-SVK 442 3R18 O20 V0 G32

  • Integrated control valves at FMP-S (optional)
  • Control of vacuum on/off (24V DC, normally open) and blow off on/off (24V DC, normally closed), as well as hose accumulator preload and blower ventilation function with version FMP-S
  • Integrated in the end cover
  • Electrical connection: M12 plug (4-pole)


Available spare parts: sealing foam (DI-PL), suction cup (SPB2)