| Size | 125 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
Spare Parts VacuMaster Basic / Comfort
Design
Design
- Vacuum generators, filters, valves, drives, measuring equipment, suction plates and connections
Technical Data
Technical Data
- Wide range of spare and wear parts
- Vacuum generators, filters, valves, drives, measuring equipment, suction plates and connections
1 - 10 from 21 results
| Size | 210 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Filter pore size | 50 (µm) |
| Outside diameter D | 27.5 (mm) |
| Length L | 50.5 (mm) |
| Filter material | Paper |
| Utilization design | Filter VF |
| Size | 3/8 |
| Filter pore size | 3 (µm) |
| Outside diameter D | 65 (mm) |
| Length L | 69.5 (mm) |
| Filter material | Paper |
| Utilization design | Dust filter STF |
| Size | 3/4-IG |
RSV 18 G1/2-IG MS
Part no.: 10.05.05.00003
No-return valve for maintaining the system vacuum in the case of a power failure
| Nominal size | 18 (mm) |
| Thread G1 | G1/2"-F |
| Nominal flow rate | 26 (m³/h) |
| Operating temperature | -20 ... 100 °C |
| Material | Brass |
VAM 67 V H-SE BAR/PSI
Part no.: 10.07.02.00016
Vacuum gauge (manometer) for analogue measurement and monitoring of the vacuum
| Outside diameter D | 67 (mm) |
| Measuring range [bar] | -1,00 ... 0,00 bar |
| Shape manometers | For panel mounting |
| Product family | VAM |
| BAR/PSI scale |
