SAOF 180x90 NBR-60 G1/2-IG

Part no.: 11.01.42.03689

Flat suction cup (oval) for very dynamic handling of smooth and oily workpieces

SAOF 180x90 NBR-60 G1/2-IG
Dimensions (LxB)180x90
Suction cup materialNitrile rubber NBR
Material hardness [Shore A]60 Shore A
Nipple materialAluminum
ConnectionG1/2-IG
Attribute Value
Bmax(S) 95 mm
Bs 86.10 mm
dn 18.60 mm
G1 G1/2"-F
H 26 mm
LG1 8 mm
Lmax.(S) 185 mm
Ls 176.10 mm
Z (Stroke) 8.90 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
Attribute Value
Suction force 660 N
Lateral force 800 N
Lateral force (oily surface) 430 N
Volume 140 cm³
Curve radius (min) (convex) 350 mm
Hose diameter (rec.) d 8 mm
Suction cup material Nitrile rubber NBR
Material hardness [Shore A] 60 Shore A
Weight 169 g
Product family SAOF
Dimensions (LxB) 180x90


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m

Ordering information: SAOF 180x90 NBR-60 G1/2-IG

Suction cup SAOF, available in various diameters, is delivered with connection nipple vulcanized to elastomer part.