Vacuum area gripping system for external vacuum generator, with flow resistors

Length L1,432 mm
Width B130 mm
Arrangement3R18
Material typeFoam O, Height 20 mm
construction shape fittingsStraight
External diameter D60 mm
Weight5.6 kg
Product familyFMP
FMP-SW70 1432 3R18 O20 G60
Attribute Value
B 130 mm
B3 21.60 mm
D 60 mm
H 70 mm
H1 116 mm
H2 20 mm
H3 7.70 mm
H4 5.50 mm
H5 46 mm
L 1432 mm
L2 1392 mm
L3 90 mm
Y1 90 mm
Valve type SW


Note: Vacuum hose with internal diameter equal to dimension D required. See Technical Data -> Shape
Attribute Value
Arrangement 3R18
Material type Foam O, Height 20 mm
Number of suction cells 231
Suction force at -250 mbar 1530 N
Weight 5.60 kg
Sealing element Sealing Foam
Evacuation rate for pu = -0,25 bar 1050 l/min
Product family FMP


For compressed air with 5.5 bar input pressure At -0.25 bar and with the gripper fully covered by a workpiece typical for the application (wooden board with structured surface) The external vacuum generator used must supply at least the specified suction flow (at the vacuum connection piece of the FMP) at -0.25 bar but max. 135 % of the specified suction flow