| Size | 125 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
Spare Parts VacuMaster Basic / Comfort
Design
Design
- Vacuum generators, filters, valves, drives, measuring equipment, suction plates and connections
Technical Data
Technical Data
- Wide range of spare and wear parts
- Vacuum generators, filters, valves, drives, measuring equipment, suction plates and connections
1 - 10 from 30 results
| Size | 160 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Size | 250 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Filter pore size | 50 (µm) |
| Outside diameter D | 27.5 (mm) |
| Length L | 50.5 (mm) |
| Filter material | Paper |
| Utilization design | Filter VF |
| Size | 3/8 |
| Thread G1 | G3/4"-M |
| Outside diameter D | 50 (mm) |
| Length L | 120 (mm) |
| Utilization design | Multi-stage ejectors |
| Connection | Hose 8/6 with Cap nut |
| Filter pore size | 50 (µm) |
| Outside diameter D | 19.2 (mm) |
| Internal diameter d | 13 (mm) |
| Length max. | 50 (m) |
| Material hose | PVC with wire spiral |
| Bending radius min. | 85 (mm) |
| Pressure range (operating pressure) [bar] | -0.90 ... 5.00 bar |
| Operating temperature | -15 ... 65 °C |
| Color | Clear-transparent |
