Vacuum End Effectors VEE
Configuring Rather than Designing
Schmalz Companies
Select your Schmalz subsidiary in one of the following countries:
Country
Configuring Rather than Designing
Application:
(1) Flange plates for standard types of robots
(2) Flange modules rigid or rotating by 360°; can be extended (optional)
(3) Basic modules
(4) Connector node
(5) Top connector G3/8"-F or closed
(6) Bottom connector incl. sealing element G1/8"-F, G1/4"-F, G3/8"-F or closed
(7) Stabilization elements (available as a suction cup accessory)
(8) Screw cover (optional)
(9) Vacuum suction cups (can be selected from the Schmalz product range)
(10) Connection tubes
(11) Plugs for partitioning into different vacuum zones
(12) Plugs
(13) Solenoid valve for active blow off
(14) Vacuum modules flange modules with integrated vacuum generation
Configure and connect VEE with ECBPi easily − individually for each application.
(1) Collaborative robot (all common cobot models)
(2) Robot flange for mechanical connection of the electrical vacuum generator ECBPi
(3) Flange adapter plate
(4) M12 8-pin plug connection or terminal block as digital interface between the ECBPi and the robot
(5) Flange for gripper connection
(6) Flexibly configurable grippers from the modular system for vacuum end effectors VEE
Specification | Specification Vacuum end effectors from the VEE system |
---|---|
Max. rated flow | 60 m³/h |
Max. vacuum value | -980 mbar |
Overpressure resistance | up to 3 bar |
Temperature range | -25 °C to +80 °C |
Material | High performance thermoplastic (compliant with FDA guidelines) |
Max. load capacity | 2,000 g |
Vacuum end effectors VEE can be freely configured within the framework values. When used in connection with our wide selection of suction pads, the possibilities are practically endless.
Specification | Specification Vacuum end effectors from the VEE system Minimum configuration |
Maximum configuration |
---|---|---|
Basic module | 1-connection | 4-connection |
Suction pad connection thread | G1/8“-F, G1/4“-F, G3/8“-F | G1/8“-F, G1/4“-F, G3/8“-F |
Gripper size (L/W) | 38 x 38 mm | 300 x 200 mm |
Weight1 | 65 g | 500 g |
Qty. of suction pads | 1 | 12 |
Workpiece sizes (L/W) | 15 x 15 mm | 400 x 300 mm |
1without flange module and suction pad
Whether for use directly in a robotic system or as a handy design tool - with the VEE starter set you have all of the most important components for quickly assembling your end effector right at your fingertips.
Contents
120-piece starter set with all of the components necessary for installing up to two VEE vacuum end effectors, including:
Supplied in a sturdy plastic case with detailed assembly instructions.
Type | Article No. |
---|---|
VEE starter set | 10.01.36.00030 |
With the VEE online configurator, you arrive at an individually tailored end effector solution with just a few mouse clicks.
You must log in to the online shop to start the configurator.
Start the configurator on the product page of the VEE Starter Set
Components and Gripping Systems in Action
Our media library takes you to application examples from your industry in just a few clicks - user-friendly, informative and practical.