| Size | 210 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 60 (Shore A) |
Spare Parts VacuMaster Basic / Comfort
Design
Design
- Vacuum generators, filters, valves, drives, measuring equipment, suction plates and connections
Technical Data
Technical Data
- Wide range of spare and wear parts
- Vacuum generators, filters, valves, drives, measuring equipment, suction plates and connections
1 - 10 from 21 results
| Filter pore size | 50 (µm) |
| Outside diameter D | 27.5 (mm) |
| Length L | 50.5 (mm) |
| Filter material | Paper |
| Utilization design | Filter VF |
| Size | 3/8 |
| Filter pore size | 3 (µm) |
| Outside diameter D | 65 (mm) |
| Length L | 69.5 (mm) |
| Filter material | Paper |
| Utilization design | Dust filter STF |
| Size | 3/4-IG |
| Measuring range [bar] | -1,0 ... 0,0 bar |
| Construction vacuum switch | Normally closed |
| Hysteresis | Fixed: approx. 40 mbar |
VAM 67 V H-SE BAR/PSI
Part no.: 10.07.02.00016
Vacuum gauge (manometer) for analogue measurement and monitoring of the vacuum
| Outside diameter D | 67 (mm) |
| Measuring range [bar] | -1,00 ... 0,00 bar |
| Shape manometers | For panel mounting |
| Product family | VAM |
| BAR/PSI scale |
| Connection | Hose 8/6 with Cap nut |
| Filter pore size | 50 (µm) |
| Filter pore size | 50 (µm) |
| Outside diameter D | 16.2 (mm) |
| Length L | 22.5 (mm) |
| Packaging unit | 5 pieces |
| Utilization design | Vacuum filter (inline) |
