SAOB 140x70 HT1-60 G1/4-IG > Vacuum Suction Cups

Bellows suction cup (oval) for high dynamic on curved, oily surfaced workpieces

Dimensions (LxB)	140 x 70
Suction cup material	High temperature material HT1
Material hardness [Shore A]	60 Shore A
Nipple material	Nickel plated
Connection	G1/4-IG
Number of folds	1.5

Attribute	Value
B1	67 mm
Bmax(S)	75 mm
Bs	70.10 mm
dn	8 mm
G1	G1/4"-F
H	47 mm
L1	126 mm
LG1	8 mm
Lmax(S)	146 mm
Ls	141.10 mm
SW1	17 mm
Z (Stroke)	16.50 mm

Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3

Attribute	Value
Suction force (-600mbar)	165 N
Pull-off force	351.90 N
Lateral force	459 N
Lateral force (oily surface)	302.80 N
Volume	106 cm³
Curve radius (min) (convex)	70 mm
Hose diameter (rec.) d	6 mm
Dimensions (LxB)	140 x 70
Number of folds	1.50
Suction cup material	High temperature material HT1
Material hardness [Shore A]	60 Shore A
Weight	117.40 g
Product family	SAOB

Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m

SAOB 140x70 HT1-60 G1/4-IG

Design Data

Technical Data

CAD Data