SAB 22 NBR-60 G3/8-IG

Part no.: 10.01.06.01650

Bellows suction cup (round) for very dynamic handling of smooth and oily workpieces

Size22
Suction cup materialNitrile rubber NBR
Material hardness [Shore A]60 Shore A
Nipple materialNickel plated
ConnectionG3/8-IG
Number of folds1.5
SAB 22 NBR-60 G3/8-IG
Attribute Value
dn 3.50 mm
D1 22 mm
Dmax(S) 24 mm
Ds 20.60 mm
G1 G3/8"-F
H 41 mm
LG1 9.50 mm
SW1 22 mm
Z (Stroke) 5.80 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
Attribute Value
Suction force (-600mbar) 16 N
Pull-off force 24 N
Lateral force 18 N
Lateral force (oily surface) 6 N
Volume 2.48 cm³
Curve radius (min) (convex) 20 mm
Hose diameter (rec.) d 4 mm
Size 22
Suction cup material Nitrile rubber NBR
Material hardness [Shore A] 60 Shore A
Weight 9 g
Product family SAB
Number of folds 1.50


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m

Ordering information: SAB 22 NBR-60 G3/8-IG

Suction cup SAB, available in various diameters, is delivered with connection nipple vulcanized to elastomer part.