SAOG 80x30 NBR-45 M10-AG

Osanro: 10.01.01.11653

Bell suction cup (oval) for very dynamic handling of smooth and oily workpieces

SAOG 80x30 NBR-45 M10-AG
Dimensions (LxB)80 x 30
Suction cup materialNitrile rubber NBR
Material hardness [Shore A]45 Shore A
Nipple materialSteel
ConnectionM10-AG
SAOG 80x30 NBR-45 M10-AG
Attribuutti Arvo
Bmax(S) 36 mm
Bs 30 mm
dn 4 mm
G1 M10-M
H 24,50 mm
LG1 10 mm
Lmax.(S) 86 mm
Ls 80 mm
SW1 16 mm
Z (Stroke) 10 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
Attribuutti Arvo
Suction force 105 N
Lateral force 65 N
Lateral force (oily surface) 45 N
Volume 13,20 cm³
Curve radius (min) (convex) 20 mm
Hose diameter (rec.) d 4 mm
Dimensions (LxB) 80 x 30
Suction cup material Nitrile rubber NBR
Weight 30,40 g
Number of folds 0
Product family SAOG


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and even workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m

Tilaustiedot: SAOG 80x30 NBR-45 M10-AG

Suction cup SAOG, available in various diameters, is delivered with connection nipple vulcanized to elastomer part.