SAOG 60x20 NBR-45 M10-AG

Osanro: 10.01.01.11760

Bell suction cup (oval) for very dynamic handling of smooth and oily workpieces

SAOG 60x20 NBR-45 M10-AG
Dimensions (LxB)60 x 20
Suction cup materialNitrile rubber NBR
Material hardness [Shore A]45 Shore A
Nipple materialSteel
ConnectionM10-AG
SAOG 60x20 NBR-45 M10-AG
Attribuutti Arvo
Bmax(S) 26 mm
Bs 20 mm
dn 4 mm
G1 M10-M
H 21,50 mm
LG1 10 mm
Lmax(S) 66 mm
Ls 60 mm
SW1 16 mm
Z (Stroke) 4,50 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
Attribuutti Arvo
Suction force (-600mbar) 56 N
Lateral force 35 N
Lateral force (oily surface) 10 N
Volume 4,86 cm³
Curve radius (min) (convex) 12,50 mm
Hose diameter (rec.) d 4 mm
Dimensions (LxB) 60 x 20
Suction cup material Nitrile rubber NBR
Weight 27,40 g
Number of folds 0
Product family SAOG


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m

Tilaustiedot: SAOG 60x20 NBR-45 M10-AG

Suction cup SAOG, available in various diameters, is delivered with connection nipple vulcanized to elastomer part.