SAXM 115 ED-85 M14x1.5-AG

Osanro: 10.01.19.00047

Bell suction cup (round) for best adaptation to strongly curved surfaces

SAXM 115 ED-85 M14x1.5-AG
Size115
Suction cup materialElastodur ED
Material hardness [Shore A]85 Shore A
Nipple materialAluminum
ConnectionM14x1.5-AG
SAXM 115 ED-85 M14x1.5-AG
Attribuutti Arvo
dn 6,10 mm
Dmax(S) 129,40 mm
Ds 115,20 mm
G1 M14x1.5-M
H 50,10 mm
LG1 10 mm
SW1 22 mm
Z (Stroke) 20 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
Attribuutti Arvo
Suction force (-600mbar) 549 N
Lateral force 320 N
Lateral force (oily surface) 584 N
Volume 141,50 cm³
Curve radius (min) (convex) 50 mm
Hose diameter (rec.) d 6 mm
Size 115
Connection M14x1.5-M
Number of folds 0
Suction cup material Elastodur ED
Material hardness [Shore A] 85 Shore A
Weight 92,50 g
Product family SAXM


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m
Tässä osiossa on saatavilla tämän tuotteen vastaava dokumentaatio.

Asiakirjat

Kieli

Asennusohjeet
English
Asennusohjeet
Deutsch
Asennusohjeet
Polski
Asennusohjeet
Türkçe
Asennusohjeet
Pусский
Asennusohjeet
한국어
Asennusohjeet
Suomalainen
Asennusohjeet
Nederlands
Asennusohjeet
Česky
Asennusohjeet
Hrvatski
Asennusohjeet
Slovenščina
Asennusohjeet
Srpski
Asennusohjeet
Tiếng Việt
Dokumentaatio on saatavilla myös kokonaan englanniksi.

Asiakirjat

Kieli

Asennusohjeet
English English

Tilaustiedot: SAXM 115 ED-85 M14x1.5-AG

Bell-shaped suction cup SAXM (elastomer part + connection element) is delivered assembled. As an alternative the individual parts can also be ordered separately. To do this, the following ordering steps are required:

  • Bell-shaped suction cup of type SAXM (step 1) – elastomer part, available in various diameters
  • Connector upper part (step 2) – available with various threads
  • Connector lower part (step 3) – including molded friction disc