SAXM 100 ED-85 M14x1.5-AG

부품 번호.: 10.01.19.00042

Bell suction cup (round) for best adaptation to strongly curved surfaces

SAXM 100 ED-85 M14x1.5-AG
Size100
Suction cup materialElastodur ED
Material hardness [Shore A]85 Shore A
Nipple materialAluminum
ConnectionM14x1.5-AG
SAXM 100 ED-85 M14x1.5-AG
속성 값
dn 6.10 mm
Dmax(S) 111.10 mm
Ds 99.70 mm
G1 M14x1.5-M
H 47.20 mm
LG1 10 mm
SW1 22 mm
Z (Stroke) 17.10 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
속성 값
Suction force (-600mbar) 412 N
Lateral force 230 N
Lateral force (oily surface) 414 N
Volume 95.50 cm³
Curve radius (min) (convex) 40 mm
Hose diameter (rec.) d 6 mm
Size 100
Connection M14x1.5-M
Number of folds 0
Suction cup material Elastodur ED
Material hardness [Shore A] 85 Shore A
Weight 74.80 g
Product family SAXM


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m
이 제품과 일치하는 문서는 이 섹션에서 사용할 수 있습니다.

서류

언어

설치 지침
English
설치 지침
Deutsch
설치 지침
Polski
설치 지침
Türkçe
설치 지침
Pусский
설치 지침
한국어
설치 지침
Suomalainen
설치 지침
Nederlands
설치 지침
Česky
설치 지침
Hrvatski
설치 지침
Slovenščina
설치 지침
Srpski
설치 지침
Tiếng Việt
이 문서는 영어로도 제공됩니다.

서류

언어

설치 지침
English English

주문 정보: SAXM 100 ED-85 M14x1.5-AG

Bell-shaped suction cup SAXM (elastomer part + connection element) is delivered assembled. As an alternative the individual parts can also be ordered separately. To do this, the following ordering steps are required:

  • Bell-shaped suction cup of type SAXM (step 1) – elastomer part, available in various diameters
  • Connector upper part (step 2) – available with various threads
  • Connector lower part (step 3) – including molded friction disc