• Adapter-Plate for using vacuum blocks VCBL-B on nesting machine tables
  • The Adapter-Plate is supplied with vacuum via a hose that is connected to the template connection of the machine
  • Vacuum blocks VCBL-B are placed into the suction cup mount of the Adapter-Plate at any orientation in 15° steps to orient the suction area as desired
  • The vacuum blocks are available in three different heights (29, 48 and 74 mm) and four different suction areas
Najważniejsze cechy produktu
  • Modular system of Adapter-Plate and suction cups offers maximum flexibility with short set-up times
  • Vacuum blocks of different heights allow several working heights and, depending on the machine, also 5-axis machining
  • Friction pad milled to size on the underside optimized for smooth surfaces
  • Push-button for manual ventilation of the underside allows quick positioning without switching off the vacuum
  • Unused vacuum blocks VCBL-B can remain on the machine table thanks to the touch valve
Adapter-Plates AP-G
  • Robust main body (1) made of aluminum
  • Push button (2) for manual blow-off of the Adapter-Plate during positioning
  • Special friction pad on the bottom (3)
  • Replaceable foam rubber seal (4) for applying suction to the MDF sheet
  • Suction cup mount (5) matches vacuum blocks VCBL-B
  • Vacuum block VCBL-B (6) are available as accessories
  • Vacuum system for nesting machine tables
  • With a hose connection
  • Target value for operating vacuum: -600 mbar
Dokumentacja dopasowania dla tego produktu jest dostępna w tej sekcji.

Dokumenty

Język

Filtr przez