SAB 125 NBR-60 RA

Part no.: 10.01.06.01059

Bellows suction cup (round) for very dynamic handling of smooth and oily workpieces

SAB 125 NBR-60 RA
Phase-out article
Size125
Suction cup materialNitrile rubber NBR
Material hardness [Shore A]60 Shore A
Nipple materialAluminum
ConnectionRA
Number of folds1,5

The item 10.01.06.01059 phases out and is still available until 31.12.2024

Beginning on this date, the item can no longer be ordered. Your local contact person would be pleased to help you find an alternative. You can reach him/her at +386 70 613 796 or info@schmalz.si

Contact form
SAB 125 NBR-60 RA
Attribute Value
dn 6 mm
D1 94 mm
Dmax(S) 135 mm
Ds 126 mm
H 67,50 mm
L4 31,80 mm
Z (Stroke) 32 mm


Note: Acceptable dimensional tolerances for elastomer parts concerning to DIN ISO 3302-1 M3
Attribute Value
Suction force (-600mbar) 250 N
Pull-off force 558 N
Lateral force 410 N
Lateral force (oily surface) 335 N
Volume 220 cm³
Curve radius (min) (convex) 140 mm
Hose diameter (rec.) d 9 mm
Size 125
Suction cup material Nitrile rubber NBR
Material hardness [Shore A] 60 Shore A
Weight 179,40 g
Product family SAB
Number of folds 1,50


Note: Suction force: The specified suction forces are theoretical values at a vacuum of -0.6 bar and with a dry, smooth and flat workpiece surface - they do not include a safety factor Lateral force: The specified lateral forces are values measured at a vacuum of -0.6 bar with a dry or oily, smooth, flat workpiece surface. Depending on the workpiece surface and its quality, the actual values may deviate from these values Hose diameter: The recommended hose diameter refers to a hose length of approx. 2 m

Ordering information: SAB 125 NBR-60 RA

Suction cup SAB, available in various diameters, is delivered with connection nipple vulcanized to elastomer part.