| Length L | 6 (mm) |
| Thread G1 | G1/8"-M |
| Material | Aluminum |
Resistor with reduced cross-section narrows the vacuum line; optimal for porous parts
Durable design without moving parts
Minimum size allows use in the tightest of spaces
Design
Design
- Double ended threaded nipple with reduced flow cross section
- Large gradation of different flow cross sections
Technical Data
Technical Data
- Nominal diameter: 0.20 to 2.0 mm
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| Serbian |
The documentation is also fully available in English.
| Documents | Language |
|---|---|
| English |
1 - 10 from 21 results
| Nominal size | 0,40 mm |
| Length L | 6 (mm) |
| Thread G1 | G1/8"-M |
| Material | Aluminum |
| Nominal size | 0,40 mm |
| Length L | 6 (mm) |
| Thread G1 | G1/4"-M |
| Material | Aluminum |
| Nominal size | 0,50 mm |
| Length L | 6 (mm) |
| Thread G1 | G1/8"-M |
| Material | Aluminum |
| Nominal size | 0,50 mm |
| Length L | 6 (mm) |
| Thread G1 | G1/4"-M |
| Material | Aluminum |
| Nominal size | 0,60 mm |
| Length L | 6 (mm) |
| Thread G1 | G1/8"-M |
| Material | Aluminum |
| Nominal size | 0,60 mm |
| Length L | 6 (mm) |
| Thread G1 | G1/4"-M |
| Material | Aluminum |
| Nominal size | 0,70 mm |
| Length L | 6 (mm) |
| Thread G1 | G1/8"-M |
| Material | Aluminum |
| Nominal size | 0,70 mm |
| Length L | 6 (mm) |
| Thread G1 | G1/4"-M |
| Material | Aluminum |
| Nominal size | 0,80 mm |
| Length L | 6 (mm) |
| Thread G1 | G1/8"-M |
| Material | Aluminum |