| Thread G1 | M5-M |
| Thread G2 | M5-F |
Ball seat valve closes the line when the suction cups are not occupied, thus maintaining the system vacuum
Low leakage can be compensated by bypass
Wide range of nominal sizes, also for high nominal flow
With male thread at the top (type SVK) or bottom (type SVKG) suitable for all common suction cups and plates
Nadstavba
Nadstavba
- Ball seat valve
- Ball in brass seat, installed in a space saving manner in an aluminum housing
- On the type SVV, the flow rate can be adjusted continuously with an adjusting screw
- Suitable for installation in any orientation
Technické údaje
Technické údaje
- Max. blow off flow rate: 4.8 to 47.4 m³/h
- Connection: M5 to G1/2”
Dokumentace
Dokumentace
V této části naleznete odpovídající dokumentaci k tomuto výrobku.
| Dokumenty | Jazyk |
|---|---|
| Česky |
Dokumentace je plně k dispozici také v angličtině.
| Dokumenty | Jazyk |
|---|---|
| Angličtina |
1 - 10 z 11 výsledků
| Thread G1 | G1/8"-M |
| Thread G2 | G1/8"-F |
| Thread G1 | G1/4"-M |
| Thread G2 | G1/4"-F |
| Thread G1 | G1/2"-M |
| Thread G2 | G1/2"-F |
| Thread G1 | G3/8"-M |
| Thread G2 | G3/8"-F |
| Thread G1 | M5-F |
| Thread G2 | M5-M |
| Thread G1 | G1/8"-F |
| Thread G2 | G1/8"-M |
| Thread G1 | G1/4"-F |
| Thread G2 | G1/4"-M |
| Thread G1 | G1/2"-F |
| Thread G2 | G1/2"-M |
| Thread G1 | G3/8"-F |
| Thread G2 | G3/8"-M |