| Size | 3 |
| Suction cup material | High temperature material HT1 |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | Aluminum |
| Connection | M3-M |
| Number of folds | 2.5 |
| Product family | FSG |
Bellows Suction Cups FSG (2.5 Folds)
Suction area (Ø) from 3 mm to 88 mm
Wide range of diameters and materials for a wide variety of workpieces (temperature resistant, dissipative, leaving few marks)
2.5 folds ensure high suction force and effective damping of sensitive workpieces
Very high suction cup stroke due to soft, flexible folds
Soft, tapered sealing lip adapts optimally to curved surfaces
Support surfaces on the bottom (from diameter 52 mm) prevent permanent deformation of thin-walled workpieces
Design
Design
- Robust and wear-resistant suction cup FSG (3) with single sealing lip, consisting of suction cup FG (2) with 2.5 folds and connection nipple (1)
- All nipples are plugged in
- Suction cups with a diameter of 52 mm or more with supports on the bottom
- With each nipple family, the replacement cups and nipples can be combined as desired
Technical Data
Technical Data
- Diameter: 3 to 88 mm
- Material: HT1, HT1-ESD, NBR, NBR-CO, NBR-ESD, NK, SI, SI-CO, SI-HD, SI-MD
- Connection nipple plugged into elastomer part
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| English |
1 - 10 from 236 results
| Size | 7 |
| Suction cup material | Silicone SI-HD |
| Material hardness [Shore A] | 65 (Shore A) |
| Material characteristics | FDA-compatible |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | High temperature material HT1 |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M3-M |
| Number of folds | 2.5 |
| Product family | FSG |
- NEW
Part no.: 10.01.06.06264
Bellows suction cup (round) for very uneven workpieces
| Size | 3 |
| Suction cup material | Hochtemp. Material HT1-ESD |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | Aluminum |
| Connection | M3-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
FSG 7 SI-HD-65 G1/8-AG
Part no.: 10.01.06.04155
Bellows suction cup (round) for very uneven workpieces
| Size | 7 |
| Suction cup material | Silicone SI-HD |
| Material hardness [Shore A] | 65 (Shore A) |
| Material characteristics | FDA-compatible |
| Nipple material | Aluminum |
| Connection | G1/8"-M |
| Number of folds | 2.5 |
| Product family | FSG |
- NEW
Part no.: 10.01.06.06265
Bellows suction cup (round) for very uneven workpieces
| Size | 3 |
| Suction cup material | Hochtemp. Material HT1-ESD |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | Aluminum |
| Connection | M5-M |
| Number of folds | 2.5 |
| Product family | FSG |
| Size | 3 |
| Suction cup material | Nitrile rubber NBR-conductive |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Connection | M3-M |
| Number of folds | 2.5 |
| Product family | FSG |
FSG 7 SI-HD-65 G1/8-IG
Part no.: 10.01.06.04156
Bellows suction cup (round) for very uneven workpieces
| Size | 7 |
| Suction cup material | Silicone SI-HD |
| Material hardness [Shore A] | 65 (Shore A) |
| Material characteristics | FDA-compatible |
| Nipple material | Aluminum |
| Connection | G1/8"-F |
| Number of folds | 2.5 |
| Product family | FSG |