| Pressure range (operating pressure) [bar] | bar |
| Length L | 38 (mm) |
| Width B | 15 (mm) |
| Height H | 9.4 (mm) |
| Utilization design | Needle gripper |
| Size | AP/AE |
Accessories Needle Grippers SNG-AP
Universally applicable, since tooling connection is possible on different sides of the gripper
Fast, reliable adaptation to a wide variety of workpieces thanks to standardized connection options
Retrofittable sensor transmits status information (needles extended or retracted) to control system
Design
Design
- HTS holder system: Bolts with slot Ø 19 mm or ball Ø 28.5 mm
- Mounting plate: 38x15x11.5 mm, G1/4" female thread
- Sensor set for both end positions with M12 plug connector
- Plug-in screw union in swiveling angular design for 6 mm hose diameter
Technical Data
Technical Data
- Components for connection of pneumatic needle grippers SNG-AP
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| Slovenian |
The documentation is also fully available in English.
| Documents | Language |
|---|---|
| English |
1 - 8 from 8 results
| Pressure range (operating pressure) [bar] | bar |
| Length L | 38 (mm) |
| Width B | 15 (mm) |
| Height H | 9.4 (mm) |
| Utilization design | Needle gripper |
| Size | AP/AE |
| Thread G1 | M5-M |
| Outer hose diameter | 6 (mm) |
| Material | Brass |
| Operating temperature | -20 ... 80 °C |
| Outside diameter D | 9.9 (mm) |
| Length L | 18.8 (mm) |
| Utilization design | Needle gripper |
| Size | AP-Sensor |
| contains | Sensor + mounting material |
| Outside diameter D | 6 (mm) |
| Internal diameter d | 4 (mm) |
| Length max. | 500 (m) |
| Material hose | PU |
| Bending radius min. | 35 (mm) |
| Pressure range (operating pressure) [bar] | -0.95 ... 10.00 bar |
| Operating temperature | -20 ... 90 °C |
| Color | Milky-transparent |
| Pressure range (operating pressure) [bar] | bar |
| Length L | 38 (mm) |
| Width B | 15 (mm) |
| Height H | 11.5 (mm) |
| Thread G1 | G1/4"-F |
| Utilization design | Needle gripper |
| Length L | 8 (mm) |
| Thread G | M4 |
| Material | Steel |
| Pressure range (operating pressure) [bar] | bar |
| Length L | 20.8 (mm) |
| Height H | 13 (mm) |
| Thread G1 | M5-M |