- POLOŽKA VYŘAZENÍ
Číslo dílu.: 10.01.01.00274
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
Large selection of materials for a wide range of requirements (temperature-resistant, conductive, non-marking, dissipative)
High suction force with small dimensions
Fastest cycle times thanks to low own volume
Support surfaces prevent deformation of thin copper films or CCLs
Special Offer: Test Suction Cups Made From the New Material HT1-ESD for Free
Need to optimize handling in electronics production? With our suction cups made from the new material HT1-ESD, we are setting new standards for handling processes in the production of final products, consumer electronics and home appliances.
The material offers permanent ESD protection, enables handling with minimized marks and has good resistance to high temperatures and ozone, without any critical additives or coatings that could diffuse into production environments and generate harmful particles.
Receive up to 20 free test samples for your system – including personal on-site consultation.
Nadstavba
Nadstavba
- Robust, wear-resistant suction cup PFYN (3) with single sealing lip, consisting of suction cup PFG (2) and connection nipple (1)
- Nipple plugged into cup
- With each nipple family, the replacement cups and nipples can be combined as desired
Technické údaje
Technické údaje
- Diameter: 1 to 30 mm
- Material: FPM, HT1, NBR, NBR-CO, NBR-ESD, SI, SI-CO
- Conductive, dissipative and mark-free variants
1 - 10 z 205 výsledků
- POLOŽKA VYŘAZENÍ
Číslo dílu.: 10.01.01.10375
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1 |
| Suction cup material | Nitrile rubber NBR-conductive |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- POLOŽKA VYŘAZENÍ
Číslo dílu.: 10.01.01.00280
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- POLOŽKA VYŘAZENÍ
Číslo dílu.: 10.01.01.14368
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1 |
| Suction cup material | Nitrile rubber NBR-ESD |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- POLOŽKA VYŘAZENÍ
Číslo dílu.: 10.01.01.00275
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1.5 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- POLOŽKA VYŘAZENÍ
Číslo dílu.: 10.01.01.10376
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1.5 |
| Suction cup material | Nitrile rubber NBR-conductive |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- POLOŽKA VYŘAZENÍ
Číslo dílu.: 10.01.01.00281
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1.5 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- POLOŽKA VYŘAZENÍ
Číslo dílu.: 10.01.01.14183
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1.5 |
| Suction cup material | Nitrile rubber NBR-ESD |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
PFYN 2 HT1-60 M3-AG
Číslo dílu.: 10.01.01.13000
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 2 |
| Suction cup material | High temperature material HT1 |
| Material hardness [Shore A] | 60 (Shore A) |
| Material property | non-marking |
| Nipple material | Aluminum |
| Product family | PFYN |
PFYN 2 NBR-55 M3-AG
Číslo dílu.: 10.01.01.00276
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 2 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |