| Size | 20 |
| Suction cup material | Silicone SI metal detectable |
| Material hardness [Shore A] | 55 (Shore A) |
| Standard | 602 |
| Suction cup type | BCG |
Suction Cups for Flow Grippers SCGS
Suction area (Ø) from 20 mm to 50 mm
Contact elements optionally food-safe (POM, SI-MD und SI-HD) or conductive for electrostatic discharge (HT1-ESD and NBR-ESD)
Very high suction flow rate enables safe gripping even of porous, highly structured workpieces
Soft, flexible sealing lip for best damping and sealing on structured surfaces such as biscuits
Suction surface made of POM prevents suction and damage to the workpiece
Suction cup can be dismantled without tools for easy cleaning
Special Offer: Test Suction Cups Made From the New Material HT1-ESD for Free
Need to optimize handling in electronics production? With our suction cups made from the new material HT1-ESD, we are setting new standards for handling processes in the production of final products, consumer electronics and home appliances.
The material offers permanent ESD protection, enables handling with minimized marks and has good resistance to high temperatures and ozone, without any critical additives or coatings that could diffuse into production environments and generate harmful particles.
Receive up to 20 free test samples for your system – including personal on-site consultation.
Design
Design
- Suction cup connector made from aluminum (FDA compliant)
- Suction cups (Ø 20-50 mm) made of FDA-compliant SI-MD, SI-HD and electrostatic HT1-ESD, NBR-ESD
- Gripping surface made out of POM (Ø 30 mm)
- Large shaft diameter for high flow rates
Technical Data
Technical Data
- Diameter suction area: 30 mm
- Diameter suction cup: 20 to 50 mm
- Suction areas made of FDA compliant POM
- Suction cups made of SI-MD, SI-HD, HT1-ESD, NBR-ESD
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| English |
1 - 10 from 25 results
| Size | 20 |
| Suction cup material | Silicone SI-HD |
| Material hardness [Shore A] | 65 (Shore A) |
| Standard | 602 |
| Suction cup type | BCG |
| Size | 20 |
| Suction cup material | Nitrile rubber NBR-ESD |
| Material hardness [Shore A] | 55 (Shore A) |
| Suction cup type | BCG |
| Size | 30 |
| Suction cup material | Silicone SI metal detectable |
| Material hardness [Shore A] | 55 (Shore A) |
| Standard | 602 |
| Suction cup type | BCG |
| Size | 30 |
| Suction cup material | Silicone SI-HD |
| Material hardness [Shore A] | 65 (Shore A) |
| Standard | 602 |
| Suction cup type | BCG |
| Size | 30 |
| Suction cup material | Nitrile rubber NBR-ESD |
| Material hardness [Shore A] | 55 (Shore A) |
| Suction cup type | BCG |
| Size | 40 |
| Suction cup material | Silicone SI metal detectable |
| Material hardness [Shore A] | 55 (Shore A) |
| Standard | 602 |
| Suction cup type | BCG |
| Size | 40 |
| Suction cup material | Silicone SI-HD |
| Material hardness [Shore A] | 65 (Shore A) |
| Standard | 602 |
| Suction cup type | BCG |
| Size | 40 |
| Suction cup material | Nitrile rubber NBR-ESD |
| Material hardness [Shore A] | 55 (Shore A) |
| Suction cup type | BCG |
| Size | 50 |
| Suction cup material | Silicone SI metal detectable |
| Material hardness [Shore A] | 55 (Shore A) |
| Standard | 602 |
| Suction cup type | BCG |