SAXM 20 ED-85 G1/4-IG
Osanro: 10.01.19.00080
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4-IG |
Very high suction cup stroke for optimum adaptation to the most varied workpiece contours
Special inner structure for maximum holding force at high accelerations, especially on oily sheets
Large, structured inner support prevents deep drawing even with thin sheets
Extremely wear-resistant material Elastodur, resistant to ozone and aggressive drawing oils
Modular, recyclable design minimizes costs and enables quick replacement of components
Design
Design
- Round bell-shaped suction cup (2) with flexible sealing lip, optimum internal structure, special oil slot and inner support
- Made of wear-proof material Elastodur of suction cup (ED-85) and friction disc (ED-65)
- Two-part connection element (SC) consisting of connector upper part (1) and lower part including a friction disc (3)
- Connector upper part with protection against lose
- Connection elements with male thread have an integrated seal on the fastening thread
Tekniset tiedot
Tekniset tiedot
- Diameter: 20 to 115 mm
- Material: ED
- Connection element modular (assembled)
Dokumentointi
Dokumentointi
Tässä osiossa on saatavilla tämän tuotteen vastaava dokumentaatio.
| Asiakirjat | Kieli |
|---|---|
| Suomalainen |
Dokumentaatio on saatavilla myös kokonaan englanniksi.
| Asiakirjat | Kieli |
|---|---|
| Englanti |
1 - 10 / 58 tuloksista
SAXM 20 ED-85 G3/8-AG
Osanro: 10.01.19.00102
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | G3/8-AG |
SAXM 20 ED-85 M10-AG
Osanro: 10.01.19.00098
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | M10-AG |
SAXM 20 ED-85 RA
Osanro: 10.01.19.00100
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | RA |
SAXM 20 ED-85 M16-AG
Osanro: 10.01.19.00118
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | M16-AG |
SAXM 20 ED-85 M14x1.5-AG
Osanro: 10.01.19.00099
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | M14x1.5-AG |
SAXM 20 ED-85 M16x1.5-AG
Osanro: 10.01.19.00105
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | M16x1.5-AG |
SAXM 20 ED-85 G1/4-AG
Osanro: 10.01.19.00101
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4-AG |
SAXM 20 ED-85 G3/8-IG
Osanro: 10.01.19.00097
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | G3/8-IG |
SAXM 30 ED-85 G1/4-AG
Osanro: 10.01.19.00049
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 30 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4-AG |