SAXM 20 ED-85 G1/4-IG
Part no.: 10.01.19.00080
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4-IG |
Very high suction cup stroke for optimum adaptation to the most varied workpiece contours
Special inner structure for maximum holding force at high accelerations, especially on oily sheets
Large, structured inner support prevents deep drawing even with thin sheets
Extremely wear-resistant material Elastodur, resistant to ozone and aggressive drawing oils
Modular, recyclable design minimizes costs and enables quick replacement of components
Design
Design
- Round bell-shaped suction cup (2) with flexible sealing lip, optimum internal structure, special oil slot and inner support
- Made of wear-proof material Elastodur of suction cup (ED-85) and friction disc (ED-65)
- Two-part connection element (SC) consisting of connector upper part (1) and lower part including a friction disc (3)
- Connector upper part with protection against lose
- Connection elements with male thread have an integrated seal on the fastening thread
Technical Data
Technical Data
- Diameter: 20 to 115 mm
- Material: ED
- Connection element modular (assembled)
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| Slovenian |
The documentation is also fully available in English.
| Documents | Language |
|---|---|
| English |
1 - 10 from 58 results
SAXM 20 ED-85 G3/8-AG
Part no.: 10.01.19.00102
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | G3/8-AG |
SAXM 20 ED-85 M10-AG
Part no.: 10.01.19.00098
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | M10-AG |
SAXM 20 ED-85 RA
Part no.: 10.01.19.00100
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | RA |
SAXM 20 ED-85 M16-AG
Part no.: 10.01.19.00118
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | M16-AG |
SAXM 20 ED-85 M14x1.5-AG
Part no.: 10.01.19.00099
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | M14x1.5-AG |
SAXM 20 ED-85 M16x1.5-AG
Part no.: 10.01.19.00105
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | M16x1.5-AG |
SAXM 20 ED-85 G1/4-AG
Part no.: 10.01.19.00101
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4-AG |
SAXM 20 ED-85 G3/8-IG
Part no.: 10.01.19.00097
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 20 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | G3/8-IG |
SAXM 30 ED-85 G1/4-AG
Part no.: 10.01.19.00049
Bell suction cup (round) for best adaptation to strongly curved surfaces
| Size | 30 |
| Suction cup material | Elastodur ED |
| Material hardness [Shore A] | 85 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4-AG |