Area gripper suitable for HRC operation, as it meets the requirements of ISO TS 15066
Direct, easy access to the device data via NFC interface using a smartphone
High effective payload despite light, dynamic geometry thanks to additive manufacturing (3D printing)
Innovative communication technology enables easy integration of the gripper in Industry 4.0 environment
Tässä osiossa on saatavilla tämän tuotteen vastaava dokumentaatio.
| Asiakirjat | Kieli |
|---|---|
| Suomalainen |
Dokumentaatio on saatavilla myös kokonaan englanniksi.
| Asiakirjat | Kieli |
|---|---|
| Englanti |
1 - 4 / 4 tuloksista
Osanro: 10.01.43.00001
Vacuum area gripping system with integrated pneumatic vacuum generator and flow resistors
| Nozzle diameter | 1.1 (mm) |
| Length L | 300 (mm) |
| Width B | 130 (mm) |
| Height H | 131.4 (mm) |
| Arrangement | 3R18 |
| Additional function area gripper | 1x control valve vacuum / blow-off |
| Additional function area gripper | Vacuum and pressure switch VSi |
| Design vacuum generator | Ejector module SEP |
| Control valve | Normally open |
| Weight | 2 (kg) |
| Construction vacuum switch | PNP switching |
Osanro: 10.01.43.00016
Vacuum area gripping system with integrated pneumatic vacuum generator and flow resistors
| Nozzle diameter | 1.1 (mm) |
| Length L | 300 (mm) |
| Width B | 130 (mm) |
| Height H | 131.4 (mm) |
| Arrangement | 3R18 |
| Additional function area gripper | 1x control valve vacuum / blow-off |
| Additional function area gripper | Vacuum and pressure switch VSi |
| Design vacuum generator | Ejector module SEP |
| Control valve | Normally open |
| Weight | 2 (kg) |
| Construction vacuum switch | NPN switching |
Osanro: 10.01.43.00070
Vacuum area gripping system with integrated pneumatic vacuum generator and flow resistors
| Nozzle diameter | 1.5 (mm) |
| Length L | 297 (mm) |
| Width B | 123.2 (mm) |
| Height H | 158 (mm) |
| Arrangement | 3R54 |
| Additional function area gripper | 1x control valve vacuum / blow-off |
| Additional function area gripper | Vacuum and pressure switch VSi |
| Design vacuum generator | Ejector module SEP |
| Control valve | Normally open |
| Weight | 2.2 (kg) |
| Construction vacuum switch | PNP switching |
Osanro: 10.01.43.00072
Vacuum area gripping system with integrated pneumatic vacuum generator and flow resistors
| Nozzle diameter | 1.5 (mm) |
| Length L | 297 (mm) |
| Width B | 123.2 (mm) |
| Height H | 158 (mm) |
| Arrangement | 3R54 |
| Additional function area gripper | 1x control valve vacuum / blow-off |
| Additional function area gripper | Vacuum and pressure switch VSi |
| Design vacuum generator | Ejector module SEP |
| Control valve | Normally open |
| Weight | 2.2 (kg) |
| Construction vacuum switch | NPN switching |
