SAB2 20 HT1-60 P
Osanro: 10.01.06.03235
Bellows suction cup (round) with 2.5 bellows for very dynamic handling of smooth and oily workpieces
| Size | 20 |
| Suction cup material | High temperature material HT1 |
| Material hardness [Shore A] | 60 (Shore A) |
| Number of folds | 2.5 |
| Shape | Push In |
Suunnitteludata
Suunnitteludata
| Attribuutti | Arvo |
|---|---|
| d | 8,5 mm |
| d1 | 10,6 mm |
| d2 | 10 mm |
| d5 | 7,9 mm |
| dn | 4,7 mm |
| D1 | 19,7 mm |
| Dmax(S) | 20,5 mm |
| Ds | 19,1 mm |
| H | 24,5 mm |
| H2 | 2,2 mm |
| H3 | 7,2 mm |
| H5 | 2 mm |
| Z (Stroke) | 9 mm |
Tekniset tiedot
Tekniset tiedot
| Attribuutti | Arvo |
|---|---|
| Suction force (-600mbar) | 4,7 N |
| Pull-off force | 13 N |
| Volume | 2,6 cm³ |
| Workpiece radius min. (convex) | 20 mm |
| Number of folds | 2,5 |
| Suction cup material | High temperature material HT1 |
| Material hardness [Shore A] | 60 Shore A |
| Weight | 2,5 g |
| Product family | SAB2 |
CAD-tiedot
CAD-tiedot
Live CAD-malli helppokäyttöinen
Kun napsautat latauspainiketta, voit ladata CAD-mallin eri tiedostomuodoissa. Jos esikatselu ei näy oikein tällä sivulla, napsauta "Lataa uudelleen" -painiketta.
Dokumentointi
Dokumentointi
Lisätarvikkeet
FD 16 12010.01.06.02565Filter disc
| Outside diameter D | 16 (mm) |
| Filter pore size | 120 (µm) |
| Utilization design | Bellows suction cup |
| Size | FG20/FGA20 |
SW 100 P 7.310.05.04.00091Flow resistor for reduction of the
volume flow rate
| Nominal size | 1,00 mm |
| Shape | Push In |
| Length L | 15.5 (mm) |
| Material | Polyoxymethylene |
| Outside diameter D | 7.3 (mm) |
SW 130 P 7.310.05.04.00092Flow resistor for reduction of the
volume flow rate
| Nominal size | 1,30 mm |
| Shape | Push In |
| Length L | 15.5 (mm) |
| Material | Polyoxymethylene |
| Outside diameter D | 7.3 (mm) |
SW 150 P 7.310.05.04.00093Flow resistor for reduction of the
volume flow rate
| Nominal size | 1,50 mm |
| Shape | Push In |
| Length L | 15.5 (mm) |
| Material | Polyoxymethylene |
| Outside diameter D | 7.3 (mm) |
SW 80 P 7.310.05.04.00090Flow resistor for reduction of the
volume flow rate
| Nominal size | 0,80 mm |
| Shape | Push In |
| Length L | 15.5 (mm) |
| Material | Polyoxymethylene |
| Outside diameter D | 7.3 (mm) |