FSTE M5-IG 10 VG
Osanro: 10.01.02.00611
Spring plunger with damping and height compensation
| Suction cup connection | M5-F |
| Vacuum connection | M5-F |
| Spring stroke Z | 10 (mm) |
| Shape mounting elements | with anti-rotation guard |
| Tightening torque (max) | 8 (Nm) |
Suunnitteludata
Suunnitteludata
| Attribuutti | Arvo |
|---|---|
| G1 | M5-F |
| G2 | M5-F |
| G3 | G1/8"-M |
| H | 47,2 mm |
| H2 | 23 mm |
| LG1 | 5,5 mm |
| LG2 | 6,2 mm |
| LG3 | 12 mm |
| SW1 | 14 mm |
| SW2 | 7 mm |
| SW3 | 7 mm |
| Z (Stroke) | 10 mm |
Tekniset tiedot
Tekniset tiedot
| Attribuutti | Arvo |
|---|---|
| Spring rate | 0,32 N/mm |
| Spring pretension | 2,75 N |
| Spring force center | 4,36 N |
| Vertical load | 1 500 N |
| Horizontal load | 97 N |
| Tightening torque (max) | 8 Nm |
| Weight | 19 g |
| Operating temperature | 0 ... 80 °C |
| Product family | FSTE |
CAD-tiedot
CAD-tiedot
Live CAD-malli helppokäyttöinen
Kun napsautat latauspainiketta, voit ladata CAD-mallin eri tiedostomuodoissa. Jos esikatselu ei näy oikein tällä sivulla, napsauta "Lataa uudelleen" -painiketta.
Dokumentointi
Dokumentointi
Varaosat
DRUCK-FED 0.5x7.1 23 0.32320.08.02.00055Pressure spring
| Wire diameter | 0.5 (mm) |
| Length L | 23 (mm) |
| Spring rate | 0.323 (N/mm) |
| Diameter | 7.1 (mm) |
Lisätarvikkeet
HTR-STA 47 1N D10/16 FL10.08.03.00085Holder for flexible mounting of
suction cups/spring plungers on
sections
| Length L | 47 (mm) |
| Connection 1 | Sliding block |
| Suction cup or spring plunger connection | Contour D10 and D16 |
| Shape | flat |
HTR-STS 30x30 D10/16 WI10.08.03.00088Holder for flexible mounting of
suction cups/spring plungers on
square tubes
| Connection 1 | 30x30 |
| Suction cup or spring plunger connection | Contour D10 and D16 |
| Shape | angled |
HTR-STS 40x40 D10/16 WI10.08.03.00089Holder for flexible mounting of
suction cups/spring plungers on
square tubes
| Connection 1 | 40x40 |
| Suction cup or spring plunger connection | Contour D10 and D16 |
| Shape | angled |
ST M5-AG 4 MS-V10.08.03.00152Hose sleeve
| Thread G1 | M5-M |
| Hose inner diameter (recom.) d | 4 (mm) |
| Material | Brass |
| Surface | nickel plated |
| Length L | 3.3 (mm) |
| Nominal diameter dn | 2.2 (mm) |
STV-GE M5-AG 410.08.02.00200Push-in Fitting, straight
| Thread G1 | M5-M |
| Outer hose diameter | 4 (mm) |
| Material | Brass |
| Operating temperature | -20 ... 80 °C |
| Outside diameter D | 7.9 (mm) |
| Length L | 15 (mm) |
STV-GE M5-AG 610.08.02.00201Push-in Fitting, straight
| Thread G1 | M5-M |
| Outer hose diameter | 6 (mm) |
| Material | Brass |
| Operating temperature | -20 ... 80 °C |
| Outside diameter D | 9.9 (mm) |
| Length L | 18.8 (mm) |
STV-T M5-AG 410.09.02.00038Push-in Fitting, T
| Thread G1 | M5-M |
| Outer hose diameter | 4 (mm) |
| Material | Brass |
| Operating temperature | °C |
| Length L | 34 (mm) |
STV-W M5-AG 410.08.02.00155Push-in Fitting, swivelling
elbow
| Thread G1 | M5-M |
| Outer hose diameter | 4 (mm) |
| Material | Nickel plated |
| Operating temperature | -20 ... 80 °C |
| Length L | 16.4 (mm) |
STV-W M5-AG 610.08.02.00235Push-in Fitting, swivelling
elbow
| Thread G1 | M5-M |
| Outer hose diameter | 6 (mm) |
| Material | Nickel plated |
| Operating temperature | -20 ... 80 °C |
| Length L | 19.7 (mm) |
STV-W M5-AG 610.08.02.00296Push-in Fitting, swivelling
elbow
| Pressure range (operating pressure) [bar] | bar |
| Length L | 20.8 (mm) |
| Height H | 13 (mm) |
| Thread G1 | M5-M |
STV-W M5-AG 6 HT10.08.02.00397Push-in Fitting, swivelling
elbow
| Thread G1 | M5-M |
| Outer hose diameter | 6 (mm) |
| Material | Brass |
| Operating temperature | -50 ... 200 °C |
| Length L | 22.5 (mm) |
STV-WF M5-AG 410.08.02.00165Push-in Fitting, swivelling
and lockable
| Thread G1 | M5-M |
| Outer hose diameter | 4 (mm) |
| Material | Nickel plated |
| Operating temperature | -10 ... 70 °C |
| Length L | 16.5 (mm) |
Tuotesuositukset
