VTR G1-IG 9xG1/2 POM
Osanro: 10.09.03.00091
Vacuum/compressed-air distributor
| Inlet | G1"-IG |
| Outlets | 9 x thread G1/2"-F |
| Length L | 160 (mm) |
| Width B | 55 (mm) |
| Height H | 50 (mm) |
| Material | Polyoxymethylene |
Suunnitteludata
Suunnitteludata
| Attribuutti | Arvo |
|---|---|
| B | 55 mm |
| d | 6,5 mm |
| G1 | G1"-F |
| G2 | G1/2"-F |
| H | 50 mm |
| L | 160 mm |
| L2 | 45 mm |
| LG1 | 20 mm |
| LG2 | 11 mm |
| X1 | 70 mm |
| Y1 | 42 mm |
| 9 x thread G1/2"-F |
Tekniset tiedot
Tekniset tiedot
| Attribuutti | Arvo |
|---|---|
| Tightening torque G1 (max.) | 5 Nm |
| Tightening torque G2 (max.) | 3 Nm |
| Material | Polyoxymethylene |
| Weight | 416 g |
| Product family | VTR |
CAD-tiedot
CAD-tiedot
Live CAD-malli helppokäyttöinen
Kun napsautat latauspainiketta, voit ladata CAD-mallin eri tiedostomuodoissa. Jos esikatselu ei näy oikein tällä sivulla, napsauta "Lataa uudelleen" -painiketta.
Dokumentointi
Dokumentointi
Lisätarvikkeet
ST G1-AG 25 MS-V10.08.03.00167Hose sleeve
| Thread G1 | G1"-M |
| Hose inner diameter (recom.) d | 25 (mm) |
| Material | Brass |
| Surface | nickel plated |
| Length L | 10.1 (mm) |
| Nominal diameter dn | 22 (mm) |
ST G1-AG 32 MS-V10.08.03.00168Hose sleeve
| Thread G1 | G1"-M |
| Hose inner diameter (recom.) d | 32 (mm) |
| Material | Brass |
| Surface | nickel plated |
| Length L | 10.5 (mm) |
| Nominal diameter dn | 26 (mm) |
ST G1/2-AG 9 MS-V10.08.03.00161Hose sleeve
| Thread G1 | G1/2"-M |
| Hose inner diameter (recom.) d | 9 (mm) |
| Material | Brass |
| Surface | nickel plated |
| Length L | 6.1 (mm) |
| Nominal diameter dn | 7.5 (mm) |
ST G1/2-AG 13 MS-V10.08.03.00162Hose sleeve
| Thread G1 | G1/2"-M |
| Hose inner diameter (recom.) d | 13 (mm) |
| Material | Brass |
| Surface | nickel plated |
| Length L | 6 (mm) |
| Nominal diameter dn | 11 (mm) |
ST G1/2-AG 19 MS-V10.08.03.00163Hose sleeve
| Thread G1 | G1/2"-M |
| Hose inner diameter (recom.) d | 19 (mm) |
| Material | Brass |
| Surface | nickel plated |
| Length L | 10 (mm) |
| Nominal diameter dn | 14.3 (mm) |
Tuotesuositukset
VSL-tyhjiö- / paineilmaletkut
- Ulko- / sisähalkaisija: 4/2 - 87/75
- Materiaali: PA, PE, PU, PVC
Litteä imukuppi SUF
- Halkaisija: 1-100 mm
- Materiaali: NBR, NBR-ESD, SI, SI-CO, HT1, HT1-ESD, EPDM-ECO: NBR, NBR-ESD, SI, SI-CO, HT1, HT1-ESD, EPDM-ECO.