- PHASE-OUT ITEM
Part no.: 10.01.01.00274
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
Large selection of materials meets a wide range of requirements (temperature resistant, dissipative, leaving few marks)
Wide range of diameters for a large selection of different workpieces
High suction force with small dimensions
Fastest cycle times thanks to low intrinsic volume
Support surfaces on the bottom prevent permanent deformation of thin-walled workpieces
Design
Design
- Robust, wear-resistant suction cup PFYN (3) with single sealing lip, consisting of suction cup PFG (2) and connection nipple (1)
- Nipple plugged in on cups up to 50 mm in diameter
- Nipple screwed into a metal inlay (vulcanized to the cup) on cups with a diameter of 60 mm or more
- With each nipple family, the replacement cups and nipples can be combined as desired
Technical Data
Technical Data
- Diameter: 1 to 200 mm
- Material: FPM, HT1, HT1-ESD, NBR, NBR-CO, PU, SI, SI-CO
- Antistatic and non-marking variants
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| Croatian |
The documentation is also fully available in English.
| Documents | Language |
|---|---|
| English |
1 - 10 from 245 results
- NEW
Part no.: 10.01.01.16270
Flat suction cup for gentle handling of displays and thin workpieces
| Size | 10 |
| Suction cup material | Hochtemp. Material HT1-ESD |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | Austenitic stainless steel |
| Product family | PFYN |
- PHASE-OUT ITEM
Part no.: 10.01.01.10375
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1 |
| Suction cup material | Nitrile rubber NBR-conductive |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- NEW
Part no.: 10.01.01.16271
Flat suction cup for gentle handling of displays and thin workpieces
| Size | 30 |
| Suction cup material | Hochtemp. Material HT1-ESD |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | Austenitic stainless steel |
| Product family | PFYN |
- PHASE-OUT ITEM
Part no.: 10.01.01.00280
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- PHASE-OUT ITEM
Part no.: 10.01.01.14368
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1 |
| Suction cup material | Nitrile rubber NBR-ESD |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- PHASE-OUT ITEM
Part no.: 10.01.01.00275
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1.5 |
| Suction cup material | Nitrile rubber NBR |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- PHASE-OUT ITEM
Part no.: 10.01.01.10376
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1.5 |
| Suction cup material | Nitrile rubber NBR-conductive |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- PHASE-OUT ITEM
Part no.: 10.01.01.00281
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1.5 |
| Suction cup material | Silicone SI |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |
- PHASE-OUT ITEM
Part no.: 10.01.01.14183
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 1.5 |
| Suction cup material | Nitrile rubber NBR-ESD |
| Material hardness [Shore A] | 55 (Shore A) |
| Nipple material | Aluminum |
| Product family | PFYN |