- 새로운
FEL SW70 748 3R18 O10 G12 PZ4
부품 번호.: 10.01.46.00124
Vacuum area gripping system for external vacuum generator, with flow resistors
| Length L | 748 (mm) |
| Width B | 130 (mm) |
| Height H | 26.5 (mm) |
| Shape | 1x passive zone / 4x suction zone |
| Length L4 | 144 (mm) |
| Length L5 | 144 (mm) |
| Arrangement suction cells | 3 rows, 18 mm |
| Nominal diameter dn | 12 (mm) |
| Weight | 2.4 (kg) |
디자인 데이터
디자인 데이터
| 속성 | 값 |
|---|---|
| B | 130 mm |
| dn | 12 mm |
| H | 26.5 mm |
| H1 | 31.3 mm |
| H2 | 10 mm |
| L | 748 mm |
| L1 | 773.7 mm |
| L2 | 112 mm |
| L3 | 156.5 mm |
| L4 | 144 mm |
| L5 | 144 mm |
| L6 | 144 mm |
| L7 | 144 mm |
| L8 | 144 mm |
| Y1 | 90 mm |
기술 데이터
기술 데이터
| 속성 | 값 |
|---|---|
| Shape | 1x passive zone / 4x suction zone |
| Suction force at -300 mbar | 470 N |
| Nozzle diameter | 0.7 mm |
| Arrangement suction cells | 3 rows, 18 mm |
| Number of suction cells | 88 |
| Required suction capacity for pu = -0.3 bar | 352 l/min |
| Weight | 2.4 kg |
CAD 데이터
CAD 데이터
사용하기 쉬운 라이브 CAD 모델
다운로드 버튼을 클릭하면 다양한 파일 형식으로 CAD 모델을 다운로드할 수 있습니다. 이 페이지에서 미리보기가 제대로 표시되지 않으면 '다시 로드' 버튼을 클릭하세요.
관련 문서
관련 문서
예비 부품
DI-PL 88.5x10 ZEL10.01.46.00071Sealing plate for area gripper FEL
| Length L | 88.5 (mm) |
| Width B | 10 (mm) |
| Height H | 8 (mm) |
| Additional function area gripper | Adhesive tape on one side |
| Utilization design | Vacuum area gripping system |
HUEL 5.4-3.4x4-FEL10.01.46.00073Sleeve
| Outside diameter D | 5.4 (mm) |
| Internal diameter d | 3.4 (mm) |
| Length L | 4 (mm) |
| Utilization design | Vacuum area gripping system |
DI-SCHN 2.5 NBR-7010.07.04.00166Sealing cord
| Outside diameter D | 2.5 (mm) |
| Material hardness [Shore A] | 70 (Shore A) |
| Sealing material | Nitrile rubber |
DI-PL 84.9x9.3 ZEL PU KE FEL10.01.46.00043Sealing plate
| Length L | 84.9 (mm) |
| Width B | 9.3 (mm) |
| Height H | 2 (mm) |
| Sealing material | Polyurethane PU |
| Additional function area gripper | Adhesive tape on one side |
| Utilization design | Vacuum area gripping system |
SCHR WN1552 5x20 ST VZ T2520.10.03.00008Counter sink screw
| Outside diameter D | 5 (mm) |
| Material | Steel |
| Length L | 20 (mm) |
| Surface | galvanised |
| Weight | 3.9 (g) |
DI-PL 591.5x128 3R18 LL-20x7 O10 PZ410.01.46.00125Sealing plate for area gripper FEL
| Length L | 591.5 (mm) |
| Width B | 128 (mm) |
| Height H | 10 (mm) |
| Additional function area gripper | Adhesive tape on one side |
| Utilization design | Vacuum area gripping system |
DI-PL 156.5x128 P0910.01.46.00107Sealing plate for area gripper FEL
| Length L | 156.5 (mm) |
| Width B | 128 (mm) |
| Height H | 0.9 (mm) |
| Additional function area gripper | Adhesive tape on one side |
| Utilization design | Vacuum area gripping system |
부속품
MOD-FLAN 130x90 FEL10.01.46.00136Flange module
| Length L | 130 (mm) |
| Width B | 90 (mm) |
| Height H | 84 (mm) |
| Utilization design | Vacuum area gripping system |
| Weight | 0.681 (kg) |
SMPi 25 NO RD M12-510.02.02.03363Compact ejector "MEGA PUMP" with
power blow-off function
| Nozzle diameter | 2.5 (mm) |
| Suction rate (max.) | 185 (l/min) |
| Air consumption suction | 290 (l/min) |
| Pressure range (operating pressure) [bar] | 4.0 ... 7.0 bar |
| Max. vacuum | -850 (mbar) |
| Control valve | Normally open |
| Functionality of the ejector | Digital air-saving function |
| Electrical connection | Male connect M12, 5 pol |
| Protection type IP | IP 65 |
ASK B-M12-5 5000 K-5P21.04.05.00080Connection cable
| Electrical connection | Fem connect M12, 5 pol |
| Cable length | 5000 (mm) |
| Connection 2 | Cable, 5-pole |
| Material hose | PUR cable |
GP 2 SMP 15..30/SCP 20..3010.02.02.00917Compressed air distributor for
use as a manifold and for
building ejector blocks
| Pressure range (operating pressure) [bar] | bar |
| Number of connections | 2 |
| Length L | 78 (mm) |
| Width B | 38 (mm) |
| Height H | 49.5 (mm) |
| Internal diameter d | 7 (mm) |
GP 3 SMP 15..25/SCP 20..2510.02.02.00918Compressed air distributor for
use as a manifold and for
building ejector blocks
| Pressure range (operating pressure) [bar] | bar |
| Number of connections | 3 |
| Length L | 101 (mm) |
| Width B | 38 (mm) |
| Height H | 49.5 (mm) |
| Internal diameter d | 7 (mm) |
GP 4 SMP 15..20/SCP 2010.02.02.00919Compressed air distributor for
use as a manifold and for
building ejector blocks
| Pressure range (operating pressure) [bar] | bar |
| Number of connections | 4 |
| Length L | 124 (mm) |
| Width B | 38 (mm) |
| Height H | 49.5 (mm) |
| Internal diameter d | 7 (mm) |
NUT-STEI 11.5x8 M4-IG25.09.06.00153Nut for profile slot
| Length L | 11.5 (mm) |
| Width B | 8 (mm) |
| Height H | 4.5 (mm) |
| Thread G1 | M4-F |
NUT-STEI 17x10.6 M6-IG25.09.06.00048Nut for profile slot
| Length L | 17 (mm) |
| Width B | 10.6 (mm) |
| Height H | 6.4 (mm) |
| Thread G1 | M6-F |
| Shape mounting elements | half-round |