MO-PROF 40 1TN AL-1
Part no.: 26.07.01.00023
Aluminium profile for construction of vacuum-gripping systems
| Width B | 40 (mm) |
| Length (max.) | 6000 (mm) |
| Form | with 1 T-slot |
| Material | Al Mg Si 0.5 F22 |
Vacuum-tight hollow profile for conducting vacuum and compressed air (3-chamber profile)
Suction cups can be screwed in directly for hose-free, integrated vacuum distribution
Sections with lateral grooves simplify the attachment of mounting elements such as holders and plungers
Low weight with high load-bearing capacity thanks to extruded aluminium profiles
Design
Design
- Hollow extruded aluminum sections
- 40 x 40 mm section with one chamber (1) and optionally with one or three slots on the sides (2)
- 80 x 40 mm section with three chambers (3) and two slots on the sides
- Holes and grooves at the ends for assembly with the aid of elbow and corner connectors, sealing plates and other accessories
Technical Data
Technical Data
- Cross-sections: 40 x 40 mm and 80 x 40 mm
- With 1 or 3 chambers
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| Slovenian |
The documentation is also fully available in English.
| Documents | Language |
|---|---|
| English |
1 - 3 from 3 results
MO-PROF 40 3TN AL-1
Part no.: 26.07.01.00022
Aluminium profile for construction of vacuum-gripping systems
| Width B | 40 (mm) |
| Length (max.) | 6000 (mm) |
| Form | with 3 T-slots |
| Material | Al Mg Si 0.5 F22 |
MO-PROF 80x40 2TN AL-1
Part no.: 26.07.01.00021
Aluminium profile for construction of vacuum-gripping systems
| Width B | 80 (mm) |
| Height H | 40 (mm) |
| Length (max.) | 6000 (mm) |
| Form | with 2 T-slots |
| Material | Al Mg Si 0.5 F22 |