PFYN 50 VU1-72 G1/4-AG
Part no.: 10.01.01.00521
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 50 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-M |
Highly tear resistant material Vulkollan VU1 withstands enormous stress
Insensitive to oils thanks to good chemical resistance
Temperature resistant from low (- 40 °C) to higher temperatures (+ 80 °C, short-term up to + 100 °C)
Minimal abrasion (approx. 10 - 12 mm³ according to DIN 53516) allows up to 20 times longer service life than standard NBR
Support surfaces on the bottom prevent permanent deformation of thin-walled workpieces
Design
Design
- Robust, wear-resistant suction cup PFYN (3) with single sealing lip, consisting of suction cup PFG (2), made of Vulkollan VU1, and connection nipple (1)
- Suction cup connected positively to nipple; no turning even when handling heavy loads
- With each nipple family, the replacement cups and nipples can be combined as desired
Technical Data
Technical Data
- Diameter: 15 to 95 mm
- Material: VU1
- Connection nipple plugged into elastomer part
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| Slovenian |
The documentation is also fully available in English.
| Documents | Language |
|---|---|
| English |
1 - 10 from 12 results
PFYN 95 VU1-72 G1/4-AG
Part no.: 10.01.01.00523
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 95 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-M |
PFYN 80 VU1-72 G1/4-IG
Part no.: 10.01.01.00524
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 80 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-F |
PFYN 95 VU1-72 G1/4-IG
Part no.: 10.01.01.00525
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 95 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-F |
PFYN 50 VU1-72 G1/4-IG
Part no.: 10.01.01.00547
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 50 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-F |
PFYN 30 VU1-72 G1/8-AG
Part no.: 10.01.01.00550
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 30 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/8"-M |
PFYN 15 VU1-72 G1/8-AG
Part no.: 10.01.01.00556
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 15 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/8"-M |
PFYN 15 VU1-72 G1/8-IG
Part no.: 10.01.01.00557
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 15 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/8"-F |
PFYN 80 VU1-72 G1/4-AG
Part no.: 10.01.01.00522
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 80 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/4"-M |
PFYN 30 VU1-72 G1/8-IG
Part no.: 10.01.01.00558
Flat suction cup (round) for smooth or slightly rough surfaces
| Size | 30 |
| Suction cup material | Vulkollan VU1 |
| Material hardness [Shore A] | 72 (Shore A) |
| Nipple material | Aluminum |
| Connection | G1/8"-F |