Bellows Suction Cups FSGA VU1 (1.5 Folds)

Suction area (Ø) from 30 mm to 110 mm

Go directly to the products

Highly tear resistant material Vulkollan VU1 withstands enormous stress

Insensitive to oils thanks to good chemical resistance

Minimal abrasion (approx. 10 - 12 mm³ according to DIN 53516) allows up to 20 times longer service life than standard NBR

Support surfaces on the bottom prevent permanent deformation of thin-walled workpieces

Design

Robust and wear-resistant suction cup FSGA (3) with single sealing lip, consisting of suction cup FGA (2) made od Vulkollan VU1 with 1.5 folds and connection nipple (1)
Suction cup connected positively to nipple; no turning even when handling heavy loads
Suction cups with supports on the bottom
With each nipple family, the replacement cups and nipples can be combined as desired

Technical Data

Diameter: 30 to 110 mm
Material: VU1
Connection nipple plugged into elastomer part

Documentation

The matching documentation for this product is available in this section.

Documents	Language
Product family overview	Slovenian

The documentation is also fully available in English.

Documents	Language
Product family overview	English

1 - 10 from 15 results

FSGA 30 VU1-72 G1/4-AG

Part no.: 10.01.06.00197

Bellows suction cup (round) with optimal adaptation to uneven surfaces

Size	30
Suction cup material	Vulkollan VU1
Material hardness [Shore A]	72 (Shore A)
Nipple material	Aluminum
Connection	G1/4"-M
Number of folds	1.5

FSGA 30 VU1-72 G1/4-IG

Part no.: 10.01.06.00169

Bellows suction cup (round) with optimal adaptation to uneven surfaces

Size	30
Suction cup material	Vulkollan VU1
Material hardness [Shore A]	72 (Shore A)
Nipple material	Aluminum
Connection	G1/4"-F
Number of folds	1.5

FSGA 40 VU1-72 G1/4-AG ON

Part no.: 10.01.06.00306

Bellows suction cup (round) with optimal adaptation to uneven surfaces

Size	40
Suction cup material	Vulkollan VU1
Material hardness [Shore A]	72 (Shore A)
Nipple material	Aluminum
Connection	G1/4"-M
Number of folds	1.5

FSGA 40 VU1-72 G1/4-IG ON

Part no.: 10.01.06.00299

Bellows suction cup (round) with optimal adaptation to uneven surfaces

Size	40
Suction cup material	Vulkollan VU1
Material hardness [Shore A]	72 (Shore A)
Nipple material	Aluminum
Connection	G1/4"-F
Number of folds	1.5

FSGA 50 VU1-72 G1/4-IG ON

Part no.: 10.01.06.00300

Bellows suction cup (round) with optimal adaptation to uneven surfaces

Size	50
Suction cup material	Vulkollan VU1
Material hardness [Shore A]	72 (Shore A)
Nipple material	Aluminum
Connection	G1/4"-F
Number of folds	1.5

FSGA 50 VU1-72 G1/4-AG ON

Part no.: 10.01.06.00307

Bellows suction cup (round) with optimal adaptation to uneven surfaces

Size	50
Suction cup material	Vulkollan VU1
Material hardness [Shore A]	72 (Shore A)
Nipple material	Aluminum
Connection	G1/4"-M
Number of folds	1.5

FSGA 60 VU1-72 G1/4-AG

Part no.: 10.01.06.00242

Bellows suction cup (round) with optimal adaptation to uneven surfaces

Size	60
Suction cup material	Vulkollan VU1
Material hardness [Shore A]	72 (Shore A)
Nipple material	Aluminum
Connection	G1/4"-M
Number of folds	1.5

FSGA 60 VU1-72 G1/4-IG

Part no.: 10.01.06.00240

Bellows suction cup (round) with optimal adaptation to uneven surfaces

Size	60
Suction cup material	Vulkollan VU1
Material hardness [Shore A]	72 (Shore A)
Nipple material	Aluminum
Connection	G1/4"-F
Number of folds	1.5

FSGA 60 VU1-72 G1/4-AG ON

Part no.: 10.01.06.00198

Bellows suction cup (round) with optimal adaptation to uneven surfaces

Size	60
Suction cup material	Vulkollan VU1
Material hardness [Shore A]	72 (Shore A)
Nipple material	Aluminum
Connection	G1/4"-M
Number of folds	1.5

FSGA 60 VU1-72 G1/4-IG ON

Part no.: 10.01.06.00172

Bellows suction cup (round) with optimal adaptation to uneven surfaces

Size	60
Suction cup material	Vulkollan VU1
Material hardness [Shore A]	72 (Shore A)
Nipple material	Aluminum
Connection	G1/4"-F
Number of folds	1.5