
Part no.: 10.01.01.12458
Edge gripper suction cup (oval) for dynamic handling of structured surfaces
Dimension (LxW) | 70 x 25 |
Suction cup material | Nitrile rubber NBR |
Material hardness [Shore A] | 60 (Shore A) |
Nipple material | Aluminum |
Connection | G1/4-AG |
Excellent sealing due to optimized sealing lip
Shortest cycle times thanks to high holding forces
Small design enables flexible positioning
Silicone-free material HT2-65, permanently temperature-resistant up to 250 °C for hot forming
Suction cup made of HT2-65 permanently temperature-resistant up to 250 °C for hot forming (silicone-free)
The matching documentation for this product is available in this section.
Documents | Language |
---|---|
Slovenian |
The documentation is also fully available in English.
Documents | Language |
---|---|
English |
1 - 4 from 4 results
Part no.: 10.01.01.12458
Edge gripper suction cup (oval) for dynamic handling of structured surfaces
Dimension (LxW) | 70 x 25 |
Suction cup material | Nitrile rubber NBR |
Material hardness [Shore A] | 60 (Shore A) |
Nipple material | Aluminum |
Connection | G1/4-AG |
Part no.: 10.01.01.12459
Edge gripper suction cup (oval) for dynamic handling of structured surfaces
Dimension (LxW) | 70 x 25 |
Suction cup material | Nitrile rubber NBR |
Material hardness [Shore A] | 60 (Shore A) |
Nipple material | Brass |
Connection | G1/4-IG |
Part no.: 10.01.01.12460
Edge gripper suction cup (oval) for dynamic handling of structured surfaces
Dimension (LxW) | 70 x 25 |
Suction cup material | Nitrile rubber NBR |
Material hardness [Shore A] | 60 (Shore A) |
Nipple material | Brass |
Connection | G3/8-IG |
Part no.: 10.01.01.12481
Edge gripper suction cup (oval) for dynamic handling of structured surfaces
Dimension (LxW) | 70 x 25 |
Suction cup material | Nitrile rubber NBR |
Material hardness [Shore A] | 60 (Shore A) |
Nipple material | Aluminum |
Connection | RA |