SAB 22 HT1-60 G1/4-IG
Part no.: 10.01.06.02722
Bellows suction cup (round) for markless handling of workpieces
| Size | 22 |
| Suction cup material | G1/4"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G1/4-IG |
| Number of folds | 1.5 |
Bellows Suction Cups SAB HT1 (1.5 Folds)
Suction area (Ø) from 22 mm to 125 mm
Minimal chemical influence on the workpiece surface thanks to the non-marking special material HT1
Handling of hot workpieces thanks to high temperature resistance
Structured inner support withstands the highest lateral forces, especially when used with separation powder and on wet workpieces
Design
Design
- Robust and wear-resistant bellows suction cup made of HT1 with 1.5 folds
- Connection nipple vulcanized to elastomer part (for very high strength)
- Special structure of the suction surface with high performance profile
Technical Data
Technical Data
- Diameter: 22 to 125 mm
- Material: HT1
- Connection nipple vulcanized to elastomer part
Documentation
Documentation
The matching documentation for this product is available in this section.
| Documents | Language |
|---|---|
| Serbian |
The documentation is also fully available in English.
| Documents | Language |
|---|---|
| English |
1 - 10 from 35 results
SAB 30 HT1-60 G1/4-IG
Part no.: 10.01.06.02723
Bellows suction cup (round) for markless handling of workpieces
| Size | 30 |
| Suction cup material | G1/4"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G1/4-IG |
| Number of folds | 1.5 |
SAB 40 HT1-60 G1/4-IG
Part no.: 10.01.06.02724
Bellows suction cup (round) for markless handling of workpieces
| Size | 40 |
| Suction cup material | G1/4"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G1/4-IG |
| Number of folds | 1.5 |
SAB 50 HT1-60 G3/8-IG
Part no.: 10.01.06.02725
Bellows suction cup (round) for markless handling of workpieces
| Size | 50 |
| Suction cup material | G3/8"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G3/8-IG |
| Number of folds | 1.5 |
SAB 60 HT1-60 G3/8-IG
Part no.: 10.01.06.02726
Bellows suction cup (round) for markless handling of workpieces
| Size | 60 |
| Suction cup material | G3/8"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G3/8-IG |
| Number of folds | 1.5 |
SAB 80 HT1-60 G3/8-IG
Part no.: 10.01.06.02727
Bellows suction cup (round) for markless handling of workpieces
| Size | 80 |
| Suction cup material | G3/8"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G3/8-IG |
| Number of folds | 1.5 |
SAB 100 HT1-60 G3/8-IG
Part no.: 10.01.06.02728
Bellows suction cup (round) for markless handling of workpieces
| Size | 100 |
| Suction cup material | G3/8"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G3/8-IG |
| Number of folds | 1.5 |
SAB 125 HT1-60 G3/8-IG
Part no.: 10.01.06.02729
Bellows suction cup (round) for markless handling of workpieces
| Size | 125 |
| Suction cup material | G3/8"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G3/8-IG |
| Number of folds | 1.5 |
SAB 22 HT1-60 G1/4-AG
Part no.: 10.01.06.02753
Bellows suction cup (round) for markless handling of workpieces
| Size | 22 |
| Suction cup material | G1/4"-M |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G1/4-AG |
| Number of folds | 1.5 |
SAB 50 HT1-60 G1/4-IG
Part no.: 10.01.06.02760
Bellows suction cup (round) for markless handling of workpieces
| Size | 50 |
| Suction cup material | G1/4"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G1/4-IG |
| Number of folds | 1.5 |