SAB 22 HT1-60 G1/4-IG
Číslo dílu.: 10.01.06.02722
Bellows suction cup (round) for markless handling of workpieces
| Size | 22 |
| Suction cup material | G1/4"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G1/4-IG |
| Number of folds | 1.5 |
Bellows Suction Cups SAB HT1 (1.5 Folds)
Suction area (Ø) from 22 mm to 125 mm
Minimal chemical influence on the workpiece surface thanks to the non-marking special material HT1
Handling of hot workpieces thanks to high temperature resistance
Structured inner support withstands the highest lateral forces, especially when used with separation powder and on wet workpieces
Nadstavba
Nadstavba
- Robust and wear-resistant bellows suction cup made of HT1 with 1.5 folds
- Connection nipple vulcanized to elastomer part (for very high strength)
- Special structure of the suction surface with high performance profile
Technické údaje
Technické údaje
- Diameter: 22 to 125 mm
- Material: HT1
- Connection nipple vulcanized to elastomer part
Dokumentace
Dokumentace
V této části naleznete odpovídající dokumentaci k tomuto výrobku.
| Dokumenty | Jazyk |
|---|---|
| Česky |
Dokumentace je plně k dispozici také v angličtině.
| Dokumenty | Jazyk |
|---|---|
| Angličtina |
1 - 10 z 35 výsledků
SAB 30 HT1-60 G1/4-IG
Číslo dílu.: 10.01.06.02723
Bellows suction cup (round) for markless handling of workpieces
| Size | 30 |
| Suction cup material | G1/4"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G1/4-IG |
| Number of folds | 1.5 |
SAB 40 HT1-60 G1/4-IG
Číslo dílu.: 10.01.06.02724
Bellows suction cup (round) for markless handling of workpieces
| Size | 40 |
| Suction cup material | G1/4"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G1/4-IG |
| Number of folds | 1.5 |
SAB 50 HT1-60 G3/8-IG
Číslo dílu.: 10.01.06.02725
Bellows suction cup (round) for markless handling of workpieces
| Size | 50 |
| Suction cup material | G3/8"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G3/8-IG |
| Number of folds | 1.5 |
SAB 60 HT1-60 G3/8-IG
Číslo dílu.: 10.01.06.02726
Bellows suction cup (round) for markless handling of workpieces
| Size | 60 |
| Suction cup material | G3/8"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G3/8-IG |
| Number of folds | 1.5 |
SAB 80 HT1-60 G3/8-IG
Číslo dílu.: 10.01.06.02727
Bellows suction cup (round) for markless handling of workpieces
| Size | 80 |
| Suction cup material | G3/8"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G3/8-IG |
| Number of folds | 1.5 |
SAB 100 HT1-60 G3/8-IG
Číslo dílu.: 10.01.06.02728
Bellows suction cup (round) for markless handling of workpieces
| Size | 100 |
| Suction cup material | G3/8"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G3/8-IG |
| Number of folds | 1.5 |
SAB 125 HT1-60 G3/8-IG
Číslo dílu.: 10.01.06.02729
Bellows suction cup (round) for markless handling of workpieces
| Size | 125 |
| Suction cup material | G3/8"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G3/8-IG |
| Number of folds | 1.5 |
SAB 22 HT1-60 G1/4-AG
Číslo dílu.: 10.01.06.02753
Bellows suction cup (round) for markless handling of workpieces
| Size | 22 |
| Suction cup material | G1/4"-M |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G1/4-AG |
| Number of folds | 1.5 |
SAB 50 HT1-60 G1/4-IG
Číslo dílu.: 10.01.06.02760
Bellows suction cup (round) for markless handling of workpieces
| Size | 50 |
| Suction cup material | G1/4"-F |
| Material hardness [Shore A] | 60 (Shore A) |
| Nipple material | |
| Connection | G1/4-IG |
| Number of folds | 1.5 |