Tìm hiểu thêm ngay bây giờ
Modular Gripper System PXT
The modular gripping system PXT gives you the flexibility you need to design optimal gripping systems for lightweight robots. You can design solutions for a wide range of handling processes with just a few standardized components. Thanks to the internal vacuum line, your solutions are designed for maximum flexibility and effectiveness. Assembly and conversion are simple, quick and require only a few tools.
Everything from one source
Modular system with matching connection elements for all Schmalz components and preconfigured robot flanges
Easy handling
Few standard components offer a wide range of applications and require only a few tools
Slim gripper design
Low dead weight and low interfering contour due to integrable vacuum guide
Flexible expansion
Fast adaptation to changing requirements and multiple use thanks to high-quality components
Tổng quan về bộ dụng cụ lắp ráp
Tổng quan về bộ dụng cụ lắp ráp
.jpg)
IMG 1:
Multi-flange (1) with connections for six types of robots
Standard section (2)
Section with groove (3) for sliding blocks
Connection element (4) for internal vacuum line and plug-in screw union
Universal holder (5) for attaching hoses and cables with cable tie
Multi-connection block (6) for connecting various components with M6 screws
Fluid cross connector (7)
Single cross connector (8), height suitable for fluid cross connector
Sealing end covers (9) for evacuating standard sections
Connection element for internal vacuum line (10) with swiveling 1/4" suction cup connection
Sliding suction cup connection (11), height suitable for connections without spring plunger
Connection element for internal vacuum line (12) with 1/4" suction cup
Suction cup connection (13) with/without spring plunger
IMG 2:
Flange (1) for connecting a longitudinal crosshead
Double rotation of the crosshead via two 3D clamps and a cross connector (2) as well as swiveling spring plunger connection (2a)
Single rotation of the crosshead via 3D clamp and cross connector (3) as well as swiveling suction cup connection (3a)
Parallel displacement of the suction cup via two 3D clamps and a parallel connector (4) as well as swiveling suction cup connection to the 3D clamp (4a)
Simple rotation of the crosshead via an internal connector (5) and swiveling suction cup connection (5a)
Thông tin đặt hàng
Thông tin đặt hàng
Mã sản phẩm
Mã sản phẩm có chức năng tương tự như mã hàng, dùng để nhận dạng duy nhất các cấu hình sản phẩm tại Schmalz. Mã sản phẩm được in trên nhãn sản phẩm hoặc trong báo giá, đơn đặt hàng. Quý khách có thắc mắc về sản phẩm hoặc muốn đặt hàng lại một cấu hình nào đó? Vậy thì tốt nhất quý khách nên chuẩn bị sẵn mã này khi liên hệ với Schmalz.
PXT
E12
500
S
12
ABC00001C
Naming
Code | Type |
|---|---|
PXT | PXT |
Vacuum guide and beams
Code | Type |
|---|---|
E 10 - 26 | External vacuum guide 10 = 1 main cross beam, 0 cross beams 26 = 2 main cross beams, 6 cross beams |
I 10 - 26 | Internal vacuum guide 10 = 1 main cross beam, 0 cross beams 26 = 2 main cross beams, 6 cross beams |
Length main traverse in mm
Code | Type |
|---|---|
Number | Length main traverse |
Connection
Code | Type |
|---|---|
S | Suction cup |
HS | Holder for suction cup |
HP | Holder for spring plunger |
P | Spring plunger |
PS SPRING PLUNGER | Spring plunger + suction cup |
Number of gripping points
Code | Type |
|---|---|
1...24 | 1 to 24 gripping points |
Configuration code
Code | Type |
|---|---|
ABC00001C | Individual configuration code |
Hướng dẫn đặt hàng
We offer three ordering options:
Order a pre-configured gripper that is fully assembled from individual components.
Order a pre-configured gripper and assemble the individual components yourself.
Order the individual components that you need.
Các ngành
Các ngành
- •Logistics
- •Packaging
- •Universal
Tài liệu
Tài liệu
Tại phần này, quý vị sẽ tìm thấy các tài liệu hướng dẫn phù hợp với sản phẩm này.
| Tài liệu | Ngôn ngữ |
|---|---|
| Vietnamese |
Tài liệu này cũng có sẵn đầy đủ bằng tiếng Anh.
| Tài liệu | Ngôn ngữ |
|---|---|
| English | |
| English |
Các cấu hình mẫu
Các cấu hình mẫu
Handling of free-form parts due to the possibility of three-dimensional assembly of the gripper
Sản phẩm
Starter set PXT
- Consisting of more than 50 parts
- Including 4 or 6 vacuum suction cups type SPB1-50
- Assembly of a complete gripping system with single or double main beam
Flange Sets PXT
- Flange patterns suitable for common lightweight robots
- Connection for single or double parallel beam
- Suitable for tube profile D30
- Clamping rings and clamping strips for easy mounting
Mounting Profiles MO-PROF PXT
- Stable standard aluminum profile
- Diameter: 30 mm
Mounting Technology PXT
- 90° cross connector with optional vacuum feed-through
- 3D connectors for free-form surfaces
Pneumatic Distributors SVB PXT
- As T- or multiple distributor
- For 8 mm pneumatic or vacuum hoses
- Push coupling for easy mounting
Connection Technology PXT
- 360° stop-free rotatable connection elements
- Holder with slot for quick adjustment
- Holder with internal vacuum guide
Pneumatic Vacuum Generators RECBi
- Suction rate up to 52.5 l/min
- Max. vacuum: 85 %
- Lift capacity up to 25 kg
Configure product
Gợi ý sản phẩm
Pneumatic Vacuum Generators RECBi
- Suction rate up to 52.5 l/min
- Max. vacuum: 85 %
- Lift capacity up to 25 kg