| Dimension (LxW) | 80 x 80 |
| Length L | 80 (mm) |
| Width B | 80 (mm) |
| Height H | 30 (mm) |
- POLOŽKA VYŘAZENÍ
Basic Holding Fixture BHF
Compatible with flat tables and Innospann Steel-Plate
Any workpiece contour possible, as the height and angle of the Uni-Base is freely adjustable
Can be used with other clamping devices from Schmalz through use on Innospann Steel-Plate
Various suction cups allow optimal adaptation to the workpiece and the surrounding process
Nadstavba
Nadstavba
- Suction cups (1) in various shapes for optimum adaptability
- Easy adjustment of the angle of inclination by means of ball joint (2) on the Uni-Base UB
- Star grip (3) for precise height adjustment, securely fixed using the clamping lever
- Compressed air connection (4) for the supply of clampable suction elements
- Simple to position and pre-fasten using the magnetic base plate (5)
Technické údaje
Technické údaje
- Flexible, manually adjustable clamping solution for free-form workpieces
- Pre-fastening using vacuum or magnets
Dokumentace
Dokumentace
V této části naleznete odpovídající dokumentaci k tomuto výrobku.
| Dokumenty | Jazyk |
|---|---|
| Česky |
Dokumentace je plně k dispozici také v angličtině.
| Dokumenty | Jazyk |
|---|---|
| Angličtina |
1 - 5 z 5 výsledků
| Dimension (LxW) | 80 x 40 |
| Length L | 80 (mm) |
| Width B | 40 (mm) |
| Height H | 30 (mm) |
| Dimension (LxW) | 80 x 28 |
| Length L | 80 (mm) |
| Width B | 28 (mm) |
| Height H | 30 (mm) |
| Length L | 135 (mm) |
| Width B | 135 (mm) |
| Height H | 156 (mm) |
| Stroke Z | 29.5 (mm) |
| Slewing angle W | 15 (°) |
| Utilization design | Steel-Plate |
| Length L | 135 (mm) |
| Width B | 135 (mm) |
| Height H | 156 (mm) |
| Stroke Z | 29.5 (mm) |
| Slewing angle W | 15 (°) |
| Utilization design | Smooth table |