ISST-MPL 300x200x3
Číslo dílu.: 10.01.28.00018
Steelplate for use with Matrix-Plate
Odvětví: Metal | Plastics | Aerospace
| Length L | 300 (mm) |
| Width B | 200 (mm) |
| Height H | 3 (mm) |
Adapter-Plates Innospann ISST-MPL and Vacuum Suction Cups ISBL
Steel-Plate and vacuum blocks for use on Matrix-Plate MPL
Simple and fast setup by using the modular system on the Matrix-Plate MPL
In combination with vacuum blocks ISBL, optimal for cutouts and 5-axis machining with few setups
Vacuum blocks ISBL are flexible in terms of position, dimensions and height and thus enable the clamping of a wide variety of workpiece geometries
Durable and resistant to cooling lubricants due to the use of aluminum, stainless steel and robust elastomers
Clamping system can be expanded at any time and thus easily adapted to new requirements and workpieces
Nadstavba
Nadstavba
- Vacuum blocks ISBL made of aluminum (1) with double seal and magnetic pre-fixation on the Steel-Plate
- Schmalz FlexMat SFM (2) for use directly on the Steel-Plate
- Sealing magnets (3) for unused vacuum openings when used with vacuum blocks ISBL
- Steel-Plate with vacuum openings (4)
- Matrix-Plate MPL (5) as basic unit of the modular clamping system
Technické údaje
Technické údaje
- Steel-Plate ISST with vacuum blocks ISBL for metal and plastic processing
- Extension for the clamping system Matrix-Plate MPL
- For 5-axis machining and the production of cutouts
Odvětví
Odvětví
- •Aerospace
- •Metal
- •Plastics
Dokumentace
Dokumentace
V této části naleznete odpovídající dokumentaci k tomuto výrobku.
| Dokumenty | Jazyk |
|---|---|
| Česky |
Dokumentace je plně k dispozici také v angličtině.
| Dokumenty | Jazyk |
|---|---|
| Angličtina |
1 - 6 z 6 výsledků
ISST-MPL 400x300x3
Číslo dílu.: 10.01.28.00019
Steelplate for use with Matrix-Plate
Odvětví: Metal | Plastics | Aerospace
| Length L | 400 (mm) |
| Width B | 300 (mm) |
| Height H | 3 (mm) |
ISST-MPL 600x400x3
Číslo dílu.: 10.01.28.00020
Steelplate for use with Matrix-Plate
Odvětví: Metal | Plastics | Aerospace
| Length L | 600 (mm) |
| Width B | 400 (mm) |
| Height H | 3 (mm) |
| Length L | 80 (mm) |
| Width B | 28 (mm) |
| Dimension (LxW) | 80 x 28 |
| Base area | 80 x 80 mm |
| Height H | 38 (mm) |
| Length L | 80 (mm) |
| Width B | 40 (mm) |
| Dimension (LxW) | 80 x 40 |
| Base area | 80 x 80 mm |
| Height H | 38 (mm) |
| Length L | 80 (mm) |
| Width B | 80 (mm) |
| Dimension (LxW) | 80 x 80 |
| Base area | 80 x 80 mm |
| Height H | 38 (mm) |
Doporučení produktů
Matrix-Plates MPL
- Basis of the modular system for metal and plastics processing
- Low-distortion clamping of flat workpieces
- Adaptable to all common machine tables
Adapter-Plates Innospann ISST-MPL and Elastomer Mats FlexMat SFM
- Steel-Plate ISST and elastomer mat with honeycomb suction points for metal and plastic processing
- Extension for the clamping system Matrix-Plate MPL
- For the production of cutouts
- NOVÝ
Vacuum Units VH-OG LS
- Mobile vacuum generation and monitoring
- Suction rate 10, 21, 40, 63 and 100 m³/h
- Max. vacuum: 98 %
- Version: LS with oil-lubricated pump, intelligent system, cooling lubricant separation and recirculation via compressed air
- NOVÝ
Pneumatic Vacuum Generators CVU
- Vacuum generators for use in CNC machines for metal processing
- Suction rate up to 8.6 m³/h
- Degree of evacuation up to 85 %
- Optional with energy-saving control, reservoir or vacuum switch for safety switching
Clamping Equipment for Metal and Plastic Processing
- Vacuum clamping technology for CNC machining of metal or plastic workpieces
- With special friction pad for high clamping forces
- Tight tolerances for high dimensional requirements