FSTImc S M5-IG M5-IG 10 CO
Číslo dílu.: 10.01.02.01687
Spring plunger in cartridge design with internal damping spring and height compensation
| Shape | Screw |
| Suction cup connection | M5-F |
| Spring stroke Z | 10 (mm) |
| Shape mounting elements | (electrically) conductive |
| Tightening torque (max) | 4 (Nm) |
Údaje o konstrukci
Údaje o konstrukci
| Atribut | Wert |
|---|---|
| B | 16 mm |
| d | 2 mm |
| G1 | M5-F |
| G2 | M5-F |
| G3 | M10x1-M |
| H | 61,5 mm |
| H2 | 19 mm |
| L | 10 mm |
| LG2 | 4,1 mm |
| LG3 | 21,5 mm |
| SW1 | 14 mm |
| SW3 | 8 mm |
| Z (Stroke) | 10 mm |
Technické údaje
Technické údaje
| Atribut | Wert |
|---|---|
| Shape mounting elements | (electrically) conductive |
| Spring force center | 0,67 N |
| Spring rate | 0,05 N/mm |
| Spring pretension | 0,42 N |
| Horizontal load | 1,5 N |
| Vertical load | 15 N |
| Tightening torque (max) | 4 Nm |
| Operating temperature | 10 ... 45 °C |
| Weight | 25,1 g |
| Product family | FSTIMC |
Data CAD
Data CAD
Snadné použití modelu CAD Live
Po kliknutí na tlačítko Stáhnout si můžete stáhnout model CAD v různých souborových formátech. Pokud se náhled na této stránce nezobrazuje správně, klikněte na tlačítko "Znovu načíst".
Dokumentace
Dokumentace
Design made easy!
Configure the FSTImc spring plunger including mounting element and associated suction cup to suit your application with ease using the new configurator from Schmalz! After the inquiry, you will receive the CAD model of the configuration and can implement this directly in the planning of the application.
Příslušenství
STV-GE M5-AG 410.08.02.00200Push-in Fitting, straight
| Thread G1 | M5-M |
| Outer hose diameter | 4 (mm) |
| Material | Brass |
| Operating temperature | -20 ... 80 °C |
| Outside diameter D | 7.9 (mm) |
| Length L | 15 (mm) |
STV-GE M5-AG 610.08.02.00201Push-in Fitting, straight
| Thread G1 | M5-M |
| Outer hose diameter | 6 (mm) |
| Material | Brass |
| Operating temperature | -20 ... 80 °C |
| Outside diameter D | 9.9 (mm) |
| Length L | 18.8 (mm) |
STV-W M5-AG 610.08.02.00296Push-in Fitting, swivelling
elbow
| Pressure range (operating pressure) [bar] | bar |
| Length L | 20.8 (mm) |
| Height H | 13 (mm) |
| Thread G1 | M5-M |
HTR-STA 47 1N D10/16 FL10.08.03.00085Holder for flexible mounting of
suction cups/spring plungers on
sections
| Length L | 47 (mm) |
| Connection 1 | Sliding block |
| Suction cup or spring plunger connection | Contour D10 and D16 |
| Shape | flat |
HTR-STS 30x30 D10/16 WI10.08.03.00088Holder for flexible mounting of
suction cups/spring plungers on
square tubes
| Connection 1 | 30x30 |
| Suction cup or spring plunger connection | Contour D10 and D16 |
| Shape | angled |
HTR-STS 40x40 D10/16 WI10.08.03.00089Holder for flexible mounting of
suction cups/spring plungers on
square tubes
| Connection 1 | 40x40 |
| Suction cup or spring plunger connection | Contour D10 and D16 |
| Shape | angled |